GYEON Q²M Water Spot Remover

GYEON Q²M Water Spot Remover
GYEON Q²M Water Spot Remover 1L - CARZILLA.CA
GYEON Q²M Water Spot Remover 1L - CARZILLA.CA
GYEON Q²M Water Spot Remover 1L - CARZILLA.CA
GYEON Q²M Water Spot Remover
GYEON Q²M Water Spot Remover 1L - CARZILLA.CA
GYEON Q²M Water Spot Remover 1L - CARZILLA.CA
GYEON Q²M Water Spot Remover 1L - CARZILLA.CA

GYEON Q²M Water Spot Remover

Save $2.55
/
Gyeon

3%+ Discount with 3+ of the Same Item

3%+ Discount with 3+ of the Same Item

Shipping calculated at checkout.
  Ask about this product Add to Compare Products Add to Compare

Earn [points_amount] when you buy this item.

×
#gyeonize

Safe on all surfaces

The greatest advantage of GYEON Q²M WaterSpot is its safety for paintwork, PPF, trims and matte films. Water spots can become a problem on freshly coated surfaces due to improper maintenance. With Q²M WaterSpot, you can eliminate these unwanted defects without the need for polishing or, in most cases, reapplying the ceramic coating.

Safe & Easy to use

GYEON Q²M WaterSpot is incredibly easy to use. Start by cleaning the bodywork with a gentle, pH-neutral, high-quality shampoo, and ensure the surface is dry. Next, spray the product directly onto the paint or a microfiber cloth, then wipe the areas affected by water spots. For more severe staining, spray generously onto the surface and wipe it a few times with a microfiber cloth. Repeat the process if necessary.

glass towel

A 390GSM waffle glass cleaning towel that provides a streak-free finish.

Shop GYEON GlassWipe EVO

Windshield Coating

Durable and effective windshield ceramic coating that lasts up to 12 months.

Shop GYEON View EVO

Winshield sealant

Easy to apply, slick, and hydrophobic sealant with a durability of 6 months.

Shop GYEON Quick View
Gyeon towel

Best Practice & Tips

Work on one panel at a time. Avoid spraying a large area at once, as the product may dry too quickly. Use a soft microfiber cloth and wipe the affected area multiple times. Repeat the process if needed. Tip: Never leave a towel soaked with the product on the surface, especially on glass.

GYEON Water Spot Remover

Superb maintenance products for outstanding detailing performance

The biggest advantage of Q²M WaterSpot is its efficiency and safety on paintwork. Due to inappropriate maintenance, water spots may become an issue on fresh coatings. You can remove the most undesirable defects by using Q²M WaterSpot without the need to polish and in most cases re-apply the quartz coat.

  • CONSUMPTION: 15ml/panel

  • COATING SAFE: YES

  • PH NEUTRAL: NO

  • BODYWORK SAFE: YES

EASY & EFFECTIVE

Q²M WaterSpot is very easy to use. Before applying, clean the bodywork with a gentle, pH-neutral HQ shampoo and dry the surface. Then spray directly onto the paint or on a microfiber cloth and wipe the area affected with water spots. If there is strong staining, spray generously directly onto the surface and wipe the surface a few times with an MF (microfiber). If required – repeat.

ADVICE ON APPLICATION AND PRECAUTIONS

Wash the entire bodywork with an HQ car shampoo, rinse well and dry. Spray onto the affected surface and wipe off with a soft MF shortly after spraying. Be aware that Q²M WaterSpot might affect the hydrophobic layer of a coating. It’s dangerous to leave the product on paint and especially on glass for a long time. Store in a dark, dry and cool place. Keep out of reach of children. Avoid applying in direct sunlight.


Yes, it is safe for use on all surfaces, including rubber and trims. However, ensure you work in the shade and avoid letting the product dry on the surface.

GYEON WaterSpot Remover is potent against mineral deposits but does not strip waxes, sealants, or coatings.

After using GYEON WaterSpot Remover, be sure to wipe the surface with a quick detailer or GYEON Prep to remove any remaining chemical residue. Watch the video here.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.