Q²M Preserve is a simple and quick way to restore lightly faded trim parts and preserve all others for a long time. It offers excellent dirt repellency, anti-static properties, and UV protection combined in just one product.
Plastic Conditioner & Anti-Static
If satin is the most desired finish for all interior surfaces, Q²M Preserve offers a very neutral, satin, factory-like finish to all interior trim parts. Q²M Preserve creates an invisible layer that does not affect the look or feel of even the softest vinyl trim in any way. It simply coats the trim to ensure its good looks remain the same as the day you bought it.
On weather seals, you can soak the rubber with Preserve for 10 to 20 minutes before wiping it off to get its suppleness back and prevent cracking.
Vinyl Deep Clean
GYEON Vinyl Cleaner is a higher pH, safe on plastics and vinyl solution made to deep clean dirty plastics.
On interior trim, use a very small amount of product and rub it into the surface with the Q²M MF Applicator. Wipe after 5 minutes since application for a fully matte finish.
TIP: Dilute up to 1:5 and use as a spray-on dressing for engine bays or wheel wells.
Scroll down for detailer reviews and FAQs.
GYEON Q²M Preserve 250 ml – Matte Trim Protectant
GYEON Q²M Preserve is a trim protectant for maintaining a natural, factory-style appearance on compatible plastics and vinyl. It can improve the look of lightly faded surfaces while adding dirt repellency, antistatic properties and UV protection.
Use Preserve after cleaning, when you want the trim to look cared for without an oily shine. It is useful for interior trim and suitable exterior plastics, with the result depending on the material and its condition. A thin, even application helps keep the finish consistent across textured and smooth sections.
Key Benefits
Matte appearance: Designed to retain a natural finish on compatible trim.
Light restoration: Helps improve colour on mildly faded plastic surfaces.
UV protection: Supports the appearance of trim exposed to sunlight.
Dirt repellency: Makes routine maintenance more manageable.
Simple application: Spreads easily with a suitable applicator or cloth.
Product Details
Product type
Plastic and vinyl trim protectant
Bottle size
250 ml
Manufacturer-rated durability
Up to 3 months
Formula pH
Neutral
Typical consumption
Approximately 50 ml per car
How to Use
Clean the trim with a compatible cleaner and remove oily residue or old dressing.
Wipe the surface dry and test Preserve in a discreet area.
Apply a moderate amount to a soft applicator or microfibre cloth.
Spread evenly over the intended trim, keeping liquid away from openings and controls.
Allow the product to settle. If the appearance is too glossy or uneven, wipe with a clean microfibre after a few minutes.
Let the surface dry before normal use.
Application Tips and Things to Watch For
Use on appropriate trim rather than surfaces where added slip would be a problem, such as pedals or control grips. Keep application controlled around screens and electronics. Follow the vehicle’s care guidance for special finishes.
Preserve is intended for maintenance and lightly faded plastics. It cannot rebuild damaged material, repair peeling coatings or permanently recolour heavily weathered trim. Test results before treating a large visible area.
Frequently Asked Questions
Is Preserve a cleaner?
No. Clean and dry the surface first. Applying it over dirt or an old oily dressing can lead to uneven appearance and less consistent performance.
Can I use it on exterior plastic?
GYEON lists suitable interior and exterior plastic applications. Exposure to weather and washing affects durability, so inspect exterior areas more often and follow the bottle’s material guidance.
How is it different from Trim EVO?
Preserve is an easy maintenance protectant with a shorter stated service life. Trim EVO is a ceramic trim coating with more involved preparation and curing. Choose according to the material, desired longevity and time available.
What if the finish looks too shiny?
Use less product and remove excess with a clean towel after it has had time to settle. Surface texture and existing residue can affect the result, so a small test area helps establish the right amount.
Does it protect leather seats?
Choose a dedicated leather product appropriate to the upholstery type. Preserve is intended for suitable trim, while LeatherCoat or LeatherShield EVO address different leather-protection requirements.
You can get a nice sheen out of it if you don't dilute the product and use it as is. But it can also be buffed clean to a matte/satin finish. When diluted 1:5, it'll give you a nice matte finish with all the UV and soiling protection still.
Around 3~4 months. To condition your rubber weather seals, we recommend treating them 1 to 2 times a year.
It depends on the sheen and protection level you prefer. A 1:1 ratio is popular for interiors if you enjoy a satin finish. A 1:3 ratio is fairly matte but still offers UV protection. A 1:5 ratio can be sprayed into engine compartments without the need to wipe it down.
You certainly can; it's great at preserving rubber, after all.
