Q² Trim's formula enables it to be applied to various parts of a vehicle: on textured structures, unpainted parts, piano black finishes (notoriously challenging to maintain), and tail- and headlight covers. This unique quality is unlikely to be found in other available products that are compatible with different surface porosities.
Restores trim to a deep satin finish without appearing greasy or unnaturally shiny.
Q² Trim is not merely a protective coating; it also possesses robust restorative and color enhancement qualities.
Tip: On porous, non-painted surfaces, you can apply the product without wiping it off. Ensure a very even finish and simply allow the product to dry and cure. It will maintain its initial look for months! For trim with a porous structure, you may use a foam applicator for an even finish.
Plastic Deep clean
Working on old, dirty plastics? Deep clean with Vinyl Cleaner; it's much stronger than Prep.
It is common to observe fading or discoloration of automotive finishing materials under the influence of UV radiation and strong chemicals used in car washes. Q² Trim preserves the long-lasting, supreme effect of color saturation, ensuring a matte or satin finish of materials. Even after 12 months, the effect of color saturation does not diminish, often surpassing the durability of traditional products.
The significant difference between Q² Trim and various other trim restoring products lies in its pure SiO₂ base. It doesn't leave an oily layer on the trim's surface but instead forms a robust bond with its structure, leaving a thick coat. Q² Trim delivers a powerful, long-lasting restoration effect.
GYEON Trim Ceramic Coating 30ml
Advanced quartz technology combined with user friendly characteristics
Q² Trim has a formula that allows it to be applied on different vehicles’ parts: on plastics with their own structure, on unpainted parts, on so-called piano-black materials, which are most problematic to maintain, and on lamp and headlight shades after renovation has been conducted. That unique quality is unlikely to be encountered in other available products.
The major difference between Q² Trim and various other trim restoring products is its pure SiO2 base. It does not leave an oily layer on the trim’s surface, but strongly bonds with its structure, leaving a thick coat.
LONG LASTING RESTORATION
It is quite common to observe fading or discoloring of automotive finishing materials under the influence of UV radiation as well as strong chemicals used in car washes. Q² Trim preserves the long-lasting, supreme effect of color saturation, which translates into ensuring a mat or satin finish of materials. Even after 12 months, the effect of color saturation does not diminish, which often means exceeding the durability of traditional products.
ADVICE ON APPLICATION AND PRECAUTIONS
Before you start applying make sure that the surface is oil free and completely dry. It is recommended to wash the car with Q²M Bathe and degrease it with Q²M Prep. Skin protection recommended. Work in a well-ventilated area. Store in a dark, dry and cool place. Keep out of reach of children. Avoid applying in direct sunlight.
On textured plastics: Deep clean with GYEON Vinyl Cleaner, followed by a final wipe down with Prep. Apply Trim and allow the product to dry without wiping it off. If you observe any unevenness, level it while the coating is still wet.
On smooth plastics like headlights and taillights: Apply in a manner similar to a paint coating, but instead of letting the product set for 3-5 minutes, wipe it off within 30 seconds.
Layerable in 1-4 hours.
All GYEON coatings can be applied outdoors. Ensure stable conditions, never use in direct sunlight and check the weather forecast!
Whether it's textured plastics, clear, or piano black finishes, GYEON Trim will do the trick. Given that piano black trims are soft and prone to scratches, it's advisable to apply two coats of Trim to minimize marring and scratches.
GYEON Trim FAQs
Trim will last at least a year and up to two years, depending on the number of coats you apply.
On textured plastics, do not wipe it off; let it dry to a nice rich satin finish on its own.
On clear and smooth plastics, wipe off within 30 seconds.
Layering time is between 1 to 4 hours, and full curing occurs within 48 hours. You can take the vehicle out after 12 hours.
If you have a Jeep Wrangler with numerous plastics, a 30ml bottle can cover approximately five Wranglers; the small bottle goes a long way.
It can be applied using an airbrush for high-complexity areas such as engine bay.
The vehicle can be driven the next day, or approximately 12 hours later. It is advisable to avoid exposing the coating to water within the first 24 hours.
A temperature of at least 10°C is recommended, although you can still attempt the application between 5°C to 10°C if necessary. If the temperature reaches 30°C, then it's on the warmer side, and you will need to retreat into the shade.
Either maintain with GYEON WetCoat or Bathe+; both products can be used as often as you like.
You won't encounter high spots on textured plastics. If, during application, you notice mild streaks, simply apply another layer to even it out.
On smooth glossy plastics: If you catch the high spots within 30 minutes, you can use the coating itself again to level/soften the high spots. If it's been a few days, then you'll need to mechanically polish it off or use Gyeon Total Remover to remove and reapply coating on the affected area.
Officially, Gyeon recommends the product to be used within 2 to 3 years when new. If the bottle has been opened, it's best to use up the product in 1 to 2 months to preserve the coating's maximum effectiveness.
No problem at all. Coatings contain a significant amount of solvents and exhibit high chemical stability. For more details regarding winter shipping, please refer to our FAQ section on winter shipping.
GYEON Trim cannot be applied to interiors such as dashboards; however, it is suitable for use on door kick plates. Different materials have different porosity levels, and plastic surfaces in vehicle interiors are far more porous than exterior plastics. Trim can only be applied to exterior hard plastics.
