Boat & RV
When using the pressure washer for detailing, you should target your PSI output between 600~900 PSI, in turn, this will maximize your washer GPM. Keep in mind that if you plan on increasing the hose length, you'll also experience PSI drop.
You should prepare a low PSI/high GPM nozzle set and a high PSI/low GPM nozzle set (good for house work).
This depends on the washer spec and nozzle size planned. The longer the hose, the more stress you'll put on the washer. Though doable, make sure to select a larger nozzle size, this will down your PSI and reduce stress on your pressure washer.
MTM's PF22.2 foam cannon comes standard with a 1.25mm (not to be confused with the 2.0, 2.5, 3.0 etc nozzle sizing) in the body and a spare 1.1mm. If you plan on running a 75 or 100 foot hose, it's preferred to keep the 1.25mm or upsize to 1.5mm to reduce stress on the washer motor.
1.25mm = 3.5 Orifice size
1.1mm = 3.0 Orifice size
With Hose Replacement (75ft example):
Kranzle 1622 > 24.0448 > 29.5224 > 10.5007 > Nozzles / Foam Cannon
With OEM Hose:
Kranzle 1622 > 24.5021 > 10.5007 > Nozzles / Foam Cannon
Kranzle 1122 > 24.5021 > 10.5007 > Nozzles / Foam Cannon
Note: The Kranzle 1122's hose cannot be replaced, it's integrated into the hose reel.
24.0631 > 24.5002 > AR630 > PW2605B > 24.0448 > 24.0081 > Whip > 24.0081 > 24.0063 > Reel > Hose > 24.0063 > 10.5007 > Nozzles / Foam Cannon
Note: If you're looking for a hot water setup, use AR630 HOT and change out the MTM guns with the Acqualine version. Make sure you get the PW2605B adapter also!
24.0631 > 24.5002 > BigBoi Washr Flo > 24.0448 > 24.0081 > Whip > 24.0081 > 24.0063 > Reel > Hose > 24.0063 > 10.5007 > Nozzles / Foam Cannon
Note: You won't be able to use the BigBoi OEM hose with an MTM/Mosmatic gun, it will require you to replace the hose, the original hose is not M22 compatible. Follow: BigBoi > 24.0448 > 29.5223 > 10.5007 > Nozzles.
Karchar K1700 Cube, K5, Ryobi, Greenworks uses 14mm M22 adapters.
Important: If you like to keep the OEM hose and upgrade your gun/wand, make sure your model's hose is M22 compatible. On the right is what your OEM gun connects to your OEM hose should look like.
For SunJoe, Kobalt, Powerplay Spyder, simply replace 14mm M22 with 15mm M22 parts. For example, replace 24.5021 with 24.5022, and 24.0448 with 24.5005.