Improve rearward visibility in wet weather with SOFT99 Glaco Mirror Coat Zero 40ml, an advanced water-repellent coating designed specifically for exterior automotive side mirrors. Developed using innovative silica-based technology, this Japanese automotive detailing product creates an ultra-hydrophobic surface that helps prevent rainwater from collecting on treated mirrors.
Unlike conventional glass rain repellents designed for windshields, Glaco Mirror Coat Zero uses a specialized coating technology that makes it difficult for water droplets to adhere to the treated surface. Its microscopic surface structure minimizes the contact area between water and the mirror, encouraging droplets to roll away rather than remain in place and obstruct your view.
The result is improved side-mirror visibility during rainy weather, helping drivers maintain a clearer view of surrounding traffic when changing lanes, reversing, and navigating wet roads.
Featuring a convenient aerosol application, SOFT99 Glaco Mirror Coat Zero distributes the coating evenly across the mirror surface when applied correctly. Its quick, straightforward application process makes it an excellent addition to any vehicle's exterior detailing and wet-weather preparation routine.
Whether you're preparing for rainy commutes, dealing with frequent showers, or looking for a dedicated water-repellent treatment for your vehicle's side mirrors, SOFT99 Glaco Zero offers specialized hydrophobic protection where conventional windshield coatings may not be suitable.
Ultra-hydrophobic technology: Creates a specialized surface that helps prevent rainwater droplets from adhering to exterior mirrors.
Improved wet-weather visibility: Helps maintain a clearer view behind and beside your vehicle during rainfall.
Designed specifically for side mirrors: Formulated for exterior automotive mirrors rather than general-purpose windshield application.
Microscopic silica-based coating: Uses a fine surface structure to minimize water contact and promote extreme water repellency.
Convenient aerosol application: Makes it easy to distribute the product evenly over the intended mirror surface.
Fast application process: The coating can be applied in minutes, followed by the required drying period.
Suitable for compatible backup-camera lenses: Can be used on compatible exterior camera lenses where the manufacturer confirms suitability.
Ideal for rainy driving conditions: Helps address one of the common visibility problems drivers encounter during wet weather.
Compact 40ml container: A convenient size for keeping in your automotive detailing collection.
SOFT99 Glaco Mirror Coat Zero uses alcohols and silica to create a specialized ultra-hydrophobic coating. Once properly applied and completely dried, the coating forms a microscopic surface structure that reduces the area available for water droplets to adhere to.
On a conventional untreated mirror, rainwater can form droplets that remain on the glass and obstruct visibility. With Glaco Mirror Coat Zero, the treated surface makes it much more difficult for water to remain attached, helping droplets move away instead.
This technology differs from conventional windshield rain repellents. Rather than relying on a typical smooth water-repellent film, Glaco Mirror Coat Zero creates a specialized microscopic structure intended to minimize water adhesion on exterior mirrors.
Important: The coating is extremely delicate after application. Touching, wiping, or rubbing the treated surface can damage the coating and reduce its performance. Correct preparation and careful aftercare are essential.
Exterior side mirrors serve a different purpose from windshields. While windshield coatings are designed to help water move across the glass during driving, side mirror coatings such as Glaco Mirror Coat Zero are formulated to prevent droplets from remaining on the mirror in the first place.
A dedicated mirror coating is particularly useful when:
Rainwater accumulates on your side mirrors during wet weather.
Water droplets interfere with your view when changing lanes.
You frequently drive in rainy conditions.
You want to improve visibility when reversing in wet weather.
You need a specialized water-repellent treatment for compatible exterior camera lenses.
For the best results, use a product designed for the particular surface being treated. SOFT99 recommends Glaco Mirror Coat Zero for side mirrors rather than its conventional windshield rain repellents.
Proper surface preparation and application are essential for achieving an even, effective coating. Follow these steps carefully.
Wash the exterior mirrors with automotive shampoo to remove dirt, road grime, and loose contamination.
If oily residue, an existing water-repellent coating, or stubborn film remains, use a suitable mirror-safe glass cleaner or preparation product to remove it.
The mirror must be completely clean before application. Contamination can prevent uniform coating formation and affect the final result.
Ensure the entire mirror surface is clean and completely dry before applying Glaco Mirror Coat Zero.
Do not apply the product to wet glass or a surface with condensation. Moisture can interfere with proper application.
For best results, work in a clean, dry, sheltered area away from rain, wind, and excessive humidity.
Position a suitable towel or protective material around the mirror housing to catch overspray. Take care to avoid contact with painted panels, plastic trim, rubber seals, and other surrounding surfaces.
This step is particularly important because the product is designed for a specific surface and should not be allowed to settle on unintended areas.
Shake and prepare the product according to its packaging instructions.
Hold the spray approximately 15cm from the mirror surface and apply an even coating using continuous side-to-side movements followed by top-to-bottom coverage.
Cover the entire intended mirror surface without applying more product than necessary.
Avoid excessive spraying or allowing the product to run or drip. An even application is more important than applying a thick layer.
Leave the mirror undisturbed until the coating has dried completely.
SOFT99 specifies the following approximate drying times:
Summer conditions: Approximately 1 hour.
Winter conditions: Approximately 2 hours.
Actual drying can vary with temperature, humidity, and working conditions. Follow the product label and allow additional time if the coating has not completely cleared.
Immediately after spraying, the mirror may appear cloudy or white. This is part of the normal application process; the appearance should gradually clear as the coating dries.
Once the coating has been applied, do not wipe the surface with a microfibre towel, glass cleaner, or other cleaning material.
The microscopic coating structure is delicate, and touching or rubbing the mirror can destroy the intended water-repellent effect.
Allow the coating to finish drying naturally before using the vehicle.
Once the mirror has dried completely, check that the surface is clear and that the application is uniform.
If the coating has been disturbed, contaminated, or applied incorrectly, consult the manufacturer's instructions before attempting to correct it. Avoid rubbing or polishing the surface while trying to improve its appearance.
Unlike conventional waxes and many windshield coatings, Glaco Mirror Coat Zero requires a particularly gentle maintenance approach.
This is the most important aftercare rule.
Avoid wiping the treated surface with towels, fingers, glass-cleaning cloths, or detailing products. The microscopic coating can be damaged by contact, even if the towel is clean and soft.
If the mirror requires cleaning, follow SOFT99's current maintenance guidance for the product rather than using your usual glass-cleaning routine.
Do not apply waxes, sealants, conventional glass repellents, or detailing sprays over the treated mirror unless SOFT99 explicitly confirms compatibility.
Other products may interfere with the specialized hydrophobic surface or reduce its effectiveness.
When washing the vehicle, take care not to spread wax, drying aids, polishing compounds, or other detailing residues onto the treated mirrors.
Avoid directing cleaning chemicals or abrasive wash media onto the coating unnecessarily.
After application, allow the mirror to dry fully before exposing it to normal use. Avoid touching or wiping it during the drying period.
When applying other exterior detailing products, protect the treated mirrors from overspray and accidental contact.
Over time, environmental contamination and physical contact may reduce water repellency.
If the coating becomes ineffective, follow SOFT99's guidance for removing or replacing it. Do not attempt to restore performance by repeatedly spraying more product over an existing coating without preparing the surface as directed.
In cold conditions or during early mornings, condensation may temporarily cause the glass to appear white or cloudy. SOFT99 identifies this as a possible behaviour of the coating.
If visibility is affected, do not drive until the mirror is sufficiently clear for safe use. If persistent cloudiness occurs, consult the product instructions and investigate whether the coating has deteriorated or been contaminated.
Use only on intended surfaces: This product is designed for exterior side mirrors and compatible surfaces specifically approved by SOFT99.
Do not use on windshields or ordinary window glass: Use a dedicated Glaco windshield coating for those surfaces.
Avoid transparent plastic surfaces: Do not apply it to headlights, visors, wind guards, goggles, or other unapproved transparent plastic.
Prevent overspray: Protect surrounding paintwork, trim, and rubber. If the product lands on an unintended surface, wipe it off immediately with a clean towel as directed by SOFT99.
Do not apply to wet mirrors: The surface must be thoroughly cleaned and dried.
Avoid excessive application: Too much product can cause dripping and an uneven coating.
Do not touch or wipe the coating: Contact can destroy the delicate hydrophobic surface structure.
Allow sufficient drying time: Wait approximately 1 hour in summer or 2 hours in winter, subject to actual conditions and product instructions.
Avoid unsuitable vehicle surfaces: SOFT99 warns against use on repainted vehicles or vehicles with poor body condition.
Do not inhale the spray: Apply only in a well-ventilated area and avoid spraying toward your face, eyes, or body.
Observe fire precautions: The product is flammable. Keep it away from heat, sparks, and open flames.
Wear suitable protective gloves: The formulation may cause skin irritation. Wash your hands thoroughly after handling.
Keep out of reach of children: Do not ingest the product, and seek appropriate medical assistance if exposure occurs.
Store correctly: Keep the container tightly sealed, below 40°C, away from direct sunlight, freezing conditions, and excessive humidity.
Glaco Mirror Coat Zero is a specialized ultra-hydrophobic coating for exterior automotive side mirrors. It helps prevent rainwater from adhering to the mirror surface, improving visibility during wet weather.
No. SOFT99 specifically advises against using this product on window glass. For windshields and other approved automotive glass surfaces, choose an appropriate windshield rain-repellent product from the SOFT99 Glaco range.
This product is intended for exterior side mirrors. It is not designed for interior rearview mirrors or general-purpose interior glass cleaning.
SOFT99 identifies compatible backup-camera lenses as an intended application for this type of mirror coating. However, confirm that the specific lens material and camera manufacturer permit the use of this product before application. Do not assume that every plastic camera cover is compatible.
SOFT99 specifies approximately 1 hour in summer and 2 hours in winter. Temperature and humidity may affect drying time, so allow the coating to clear completely and follow the instructions on the product packaging.
Temporary white cloudiness is a normal part of the application process. The mirror should gradually return to a clear appearance as the coating dries. Persistent cloudiness or impaired visibility should not be ignored.
No. SOFT99 warns that touching or wiping the treated surface can destroy the coating's microscopic structure. Allow it to dry naturally and avoid contact with towels or fingers.
Glaco Mirror Coat Zero should be applied to a thoroughly cleaned and dried mirror. Remove existing water-repellent residue and oily contamination using an appropriate mirror-safe cleaner before application.
Do not assume that a coating intended for windshields is suitable for side mirrors.
Protect surrounding surfaces before application. If the product contacts an unintended surface, SOFT99 instructs users to wipe it off immediately with a clean towel to help prevent damage. Follow the product label for the specific surface involved.
If the effect diminishes, consult SOFT99's instructions for the product. The manufacturer's guidance indicates that a deteriorated coating should be addressed rather than simply covered with additional product. Proper surface preparation is essential before reapplication.
It can be useful in rainy conditions, but application requires suitable working conditions. The mirror must be completely clean and dry, and the coating must be allowed to dry fully before use.
Cold weather and condensation can affect the appearance of the treated mirror. Follow the specified drying time and do not use the vehicle until visibility is clear enough for safe driving.
No. The coating is designed to repel water, not eliminate the need for all cleaning or maintenance. Follow SOFT99's recommendations for maintaining the treated surface and avoid cleaning methods that could damage the coating.
Brand: SOFT99
Product name: Glaco Mirror Coat Zero
Product type: Ultra-hydrophobic automotive mirror coating
Size: 40ml
Application method: Aerosol spray
Key ingredients: Alcohols and silica
Intended use: Exterior automotive side mirrors and compatible camera lenses
Primary benefits: Extreme water repellency and improved wet-weather mirror visibility
Drying time: Approximately 1 hour in summer and 2 hours in winter, subject to conditions
Country of origin: Japan
Pair Glaco Mirror Coat Zero with suitable products for the rest of your vehicle's exterior glass:
SOFT99 Glaco Compound Roll On: For preparing exterior automotive glass by removing stubborn contamination and old coatings where appropriate.
SOFT99 Glaco Ultra: For long-lasting water-repellent protection on compatible windshield and automotive glass surfaces.
SOFT99 Glaco Roll On Large: For convenient water-repellent treatment of approved exterior glass surfaces.
SOFT99 Glaco Glass Cleaner: For cleaning suitable glass surfaces before applying compatible glass treatments.
Always check the intended surface and instructions for each product. Glaco Mirror Coat Zero is specifically intended for mirrors and should not be substituted for a windshield coating.
Rainwater on exterior mirrors can make it more difficult to see surrounding traffic when driving in wet conditions. SOFT99 Glaco Mirror Coat Zero 40ml addresses this problem with a specialized ultra-hydrophobic coating designed to prevent water droplets from clinging to the treated mirror surface.
Its silica-based technology and convenient aerosol application make it a practical addition to your automotive detailing routine. For best results, clean and dry the mirror thoroughly, apply a light and even coating, and allow it to dry completely without touching or wiping the surface.
Choose SOFT99 Glaco Mirror Coat Zero for dedicated side mirror water repellency and improved visibility in rainy weather. Always ensure your mirrors are clear and provide adequate visibility before driving.
