Improve wet-weather visibility with SOFT99 Glaco W-Jet Strong G-64, a high-powered spray-on water repellent designed to treat your vehicle's windshield in seconds. Its innovative double-jet nozzle delivers a strong, wide spray, helping cover even large windshields quickly and conveniently.
Unlike traditional glass coatings that require careful hand application and a longer finishing process, Glaco W-Jet Strong is designed for rapid use. When rain begins, spray it across the wet windshield while the wipers are operating, and the treatment starts repelling water almost immediately.
Prefer to apply it in dry weather? Glaco W-Jet Strong can also be applied to a clean, dry windshield and spread using a damp, tightly wrung-out towel.
With a generous 180ml aerosol bottle, Glaco W-Jet Strong is a practical option for drivers looking for quick glass water repellency without a lengthy application process.
Key Features and Benefits
Approximately 3-second application: Quickly treats the windshield using its high-powered double-jet spray.
Immediate water repellency: Helps rainwater bead up and move off the glass after application.
Designed for wet-weather use: Can be applied to a wet windshield while the wipers are operating.
Suitable for dry-weather application: Spray onto a clean, dry windshield and wipe evenly with a damp, tightly wrung-out towel.
Powerful double-jet nozzle: Helps distribute the product over large windshields, including those on SUVs and minivans.
Convenient 180ml size: A practical addition to your automotive glass-care supplies.
Easy-to-use aerosol format: Designed for quick application when time is limited.
Made in Japan: A glass-care product from SOFT99's Glaco range.
How to Apply SOFT99 Glaco W-Jet Strong
Glaco W-Jet Strong can be applied to wet or dry glass. Choose the appropriate method below and always follow the instructions on the product label.
Method 1: Application During Rain
Step 1 – Position the vehicle safely
Park in a safe location before applying the product. Never spray the windshield while driving.
Step 2 – Activate the windshield wipers
Turn on the wipers so they are moving across the windshield.
Step 3 – Spray the windshield
Spray across the windshield for approximately 3 seconds, following the bottle's instructions. Aim to cover the intended glass surface evenly.
Step 4 – Check visibility
Allow the wipers to distribute the treatment. Confirm that the windshield is clear and that the wipers operate normally before continuing your journey.
Method 2: Application in Dry Weather
Step 1 – Clean the glass
Remove dirt, dust, and oily traffic film. For stubborn contamination or an existing coating that needs removal, use an appropriate glass-preparation product such as SOFT99 Glaco Compound Roll On.
Step 2 – Spray the windshield
Apply the product evenly over the windshield for approximately 3 seconds, following the label directions.
Step 3 – Spread and finish
Use a clean towel dampened with water and wrung out thoroughly to spread the product over the glass and remove excess residue. A dry towel alone may not remove the residue properly.
Step 4 – Inspect the glass
Check the windshield from different angles to ensure it is clear and free from streaks or uneven residue.
Maintenance and Aftercare
Keep the windshield clean to help maintain clear visibility and consistent water repellency.
Use clean towels when wiping glass to avoid transferring dirt or oils.
Monitor wiper performance after application. If the blades chatter or judder, inspect the glass for residue and check the condition of the wiper blades.
Avoid applying the product over an existing glass coating unless the instructions for your specific product version confirm compatibility.
For best results when applying to dry glass, remove stubborn traffic film and incompatible old coatings before treatment.
Reapply according to the product label and when the water-repellent effect has diminished.
Frequently Asked Questions
How long does Glaco W-Jet Strong take to apply?
SOFT99 describes an application time of approximately 3 seconds for the windshield. Additional time may be needed to prepare the glass or wipe away residue when applying in dry conditions.
Can I use Glaco W-Jet Strong when it is raining?
Yes. It is designed for wet-weather application. Turn on the windshield wipers and spray the windshield for approximately 3 seconds as directed. Always stop in a safe location before applying it.
Can I apply it when the windshield is dry?
Yes. Clean the glass first, spray the product evenly, and use a damp, tightly wrung-out towel to spread the treatment and remove residue.
At what speed does the water-repellent effect work?
SOFT99's Glaco product information indicates that water can be repelled sufficiently for reduced wiper use at approximately 60 km/h or higher under suitable conditions. This is not a guarantee of visibility or safe driving without wipers. Use your wipers whenever necessary.
Can I use it on a large windshield or an SUV?
The high-pressure double-jet spray is designed to help cover large windshields quickly, including those on SUVs and minivans. Ensure the entire intended glass surface is covered.
Can I use it on side windows or mirrors?
The manufacturer's instructions specify glass surfaces only, but the product is primarily designed for windshield application. Check the label for any limitations before using it on other glass surfaces. Do not use it on interior glass or transparent plastic.
Can I use it over another glass coating?
Compatibility depends on the coating and the instructions for the specific product version. SOFT99's regional product information differs on use over existing coatings, so follow the label supplied with your bottle rather than assuming it is compatible.
How long does the coating last?
The official product information emphasizes fast application and improved durability compared with the previous version, but does not provide a universal duration in months. Actual performance depends on weather, wiper use, cleaning, and glass condition.
Product Specifications
Brand: SOFT99
Product name: Glaco W-Jet Strong
Product code: G-64
Product type: Aerosol automotive glass water repellent
Application methods: Wet-glass spray application or dry-glass spray-and-wipe application
Approximate spray time: 3 seconds for a windshield
Nozzle design: High-pressure double-jet spray
Origin: Japan
Important Precautions
This product is a flammable, pressurized aerosol. Keep it away from heat, sparks, open flames, and other ignition sources. Do not puncture or burn the container, even when empty. Use only outdoors or in a well-ventilated area, avoid inhaling the spray, and follow the bottle's safety instructions.
Use only on suitable exterior glass. Do not apply to interior glass or transparent plastics such as headlight lenses, helmet visors, and wind guards. Avoid contact with paint and other unintended surfaces; wipe accidental contact away promptly as directed. Do not use on hot glass or in direct sunlight.
Temperature and humidity changes may temporarily cause glass to turn white. If visibility is affected, use the windshield wipers immediately. Never apply the product while driving, and do not continue driving unless visibility is clear.
Why Choose SOFT99 Glaco W-Jet Strong?
SOFT99 Glaco W-Jet Strong is designed for drivers who want a fast, convenient way to add water repellency to their windshield. Its powerful double-jet nozzle and wet-weather application method make it especially useful when rain arrives unexpectedly, while its dry-glass method provides another option when conditions are suitable.
