Part 24.0081 has a three-eighths-inch quick-connect plug on one end and a female threaded port on the other. The word female describes the thread. Compare the quick-connect socket, thread standard and pressure rating separately when matching this stainless fitting to a hose or spray gun.
MTM Hydro's Stainless Steel Plugs offer a fast and upgraded QC system for your high pressure joints which are great for quickly disconnecting hose lines, spray guns, or any pressure washing attachments. MTM Hydro boasts a premium Stainless Steel line of fittings that ensures our customers a worry free cleaning experience with anti-corrosive properties and ultra reliable performance. They are commonly found at all joints where high pressure fluid may need to be disconnected after use. Other areas such as lances, tips, and foam cannons are convenient places to install these QC's and with MTM Hydro's stringent Quality Control you will not have to worry about locking balls falling out, missing O-rings, or collars that do not fully engage.
As a rule of thumb, MTM Hydro 3/8" fittings are normally found between the pump and the spray gun where 3/8" hose is commonly used.. When purchasing plugs and couplers the Male model has exposed threads while the Female version has threads on the interior of the fitting. See image for reference.
All MTM Stainless Plugs are National Pipe Thread (NPT) which means they have a tapered Male or Female thread (depending upon the model). NPT is mainly used in the Western Hemisphere and was developed on the concept of interference by the third thread. When installing NPT fittings to another NPT thread we recommend that you use 4-5 wraps of teflon tape wound clockwise, or 2-3 drops of Loctite thread sealant.
When identifying a pressure-washer fitting, compare the quick-connect plug and the threaded end separately. For the quick-connect side, match the socket profile and size specified by the equipment manufacturer. For the threaded side, compare the nominal diameter, thread standard and male or female orientation with the equipment documentation. British pipe threads and American NPT threads can look similar at a glance. Use a purpose-made, pressure-rated adapter if the two components use different standards. If the original markings are hard to read, identify the port from the machine or reel parts diagram before ordering.