Spray sealant for a high-gloss surface

PerfectFinish Sealant is an efficient spray sealant for the long-lasting protection of vehicle paint surfaces. The treated surface is given a high-gloss finish. PerfectFinish Sealant can be used as a stand-alone sealant. Due to its strong hydrophobicity, it is suitable as a topping for an existing ceramic coating. Follow-up vehicle washes are simplified by the easy-to-clean effect. Easy to use with a pleasant fruity fragrance.

Perfect Finish Sealant is our newest water-based sealant. The slightly thicker consistency means this product spread evenly on the surface and the water-based formula means the wipe off is easier than ever. The formula is also designed to work perfectly in direct sunlight and outdoor conditions without affecting working time or performance. Pfs will last 8-12 weeks on the surface and will give amazing gloss, great hydrophobics, and a Perfect Finish.

Apply undiluted to the surface by spraying onto a microfiber towel or squeezing onto a microfiber applicator and wiping it on the surface. Let sit for 2-3 minutes, then wipe off excess with a second clean microfiber towel. Let cure for 2-4 hours for best results

Recommendations for use: Pre-clean/wash the vehicle according to how dirty it is and dry thoroughly. Depending on the condition of the paintwork, treat the surface with a silicone-free polish and then degrease with Panel Preparation Spray. Spray PerfectFinish Sealant onto a clean Polish & Sealing Towel and spread evenly over contiguous areas. Finally, remove the residue with a dry Polish & Sealing Towel. Do not spray directly onto painted surfaces. Alternatively, the product can be applied by machine. To do this, apply PerfectFinish Sealant to a Polish & Sealing Foam Pad and work it into the vehicle paintwork in sections using a compressed air eccentric or eccentric polishing machine. Finally, remove the residue with a dry Polish & Sealing Towel. After applying PerfectFinish Sealant, the vehicle must not be washed again within 24 hours.