This depends on several factors. For our Canadian climate, we often recommend applying two layers. While this won't double the coating's longevity, it can still provide a significant boost, around 20% or more, compared to a single-layer application. Since the vehicle is already clean and prepped, it's a good idea to apply a second layer. While the preparation process may take some time, the application itself is straightforward. It is recommended to top up with Gyeon Cure or Gyeon Ceramic Detailer to get the maximum durability out of the coating.

The timeframe below is under regular maintenance with Gyeon Cure or Gyeon Ceramic Detailer:

• Summer-driven only (garage kept): at least 12 months or beyond
• Summer-driven with no garage: ~12 months
• Winter-driven only (garage kept): 6-12 months
• Daily-driven: 6-12 months

In the winter, maintenance becomes crucial for its longevity for daily/winter-driven cars. Without regular maintenance or reapplication during the winter months (understandably challenging in -30°C weather), you may notice wear and deterioration on the lower sections due to road salts, chemicals, contaminants, and other factors. After a thorough decontamination, water beading may return, but it's not uncommon for the lower sections to show signs of wear after winter. This is particularly true given the harshness of our winters, at least here in Canada. The key takeaway is that the coating is designed to wear off first, protecting the paint beneath.

Indeed, layering is highly encouraged, but it's crucial to find the right timing. We typically recommend waiting around 2 hours between layers for CanCoat EVO, but it's best not to exceed 12 hours. If you wait too long, you'll be applying the second layer onto a surface that has already hardened and become slick, diminishing the effectiveness of bonding. Ideally, you want to apply the second layer when the first layer is still in the process of curing, allowing for cohesive bonding. The coating should be both physically layerable and able to bond well at the same time.

With the new EVOs, a 200ml bottle can cover an average of 13 mid-sized vehicles with one layer! It's important to note that applying two coats does make a noticeable difference.

You can layer CanCoat EVO with another layer of CanCoat EVO, Gyeon Cure, or Ceramic Detailer. The general rule of thumb is to apply the most durable product first and the slicker product on top. CanCoat EVO can also be used as a topper for ceramic-coated cars.

A general rule of thumb is to avoid water contact for 24 to 48 hours and refrain from using soap for a week. However, after the coating is applied, you can take the vehicle out immediately. Dust, dew, and wind won't have much effect, but it's important to be mindful of bugs, which can impact the finish. If you're a business coating a vehicle for a customer, and it must be exposed to water within the next 12 hours, you can very gently wipe it down with Gyeon Cure or Gyeon Ceramic Detailer. We still recommend against it, but sometimes it's necessary. It's important to understand that drying and curing are distinct processes. While the coating or panel may feel dry to the touch right away, curing involves the molecular locking process, and it requires time to fully cure.

A temperature of at least 10°C is recommended, although you can still attempt the application between 5°C to 10°C if necessary. If the temperature reaches 30°C, then it's on the warmer side, and you will need to retreat into the shade. Ideally, you want the coating to remain on the panel for at least 30 to 60 seconds without flashing right away. If it flashes within that time, it's likely that the panel is too hot.

Absolutely, all the new Gyeon EVO coatings can be applied outdoors; just be mindful of the temperature, as mentioned in the question above.

You can use products like Gyeon WetCoat, Cure, Ceramic Detailer, etc., as frequently as you'd like. The only thing to caution about is using waxes on your coating (Gyeon Wax is fine) because most waxes have strong solvents that may affect the coating.

High spots refer to dried coatings that were not completely buffed off. If you catch the high spots within 30 minutes, you can use the coating itself again to level/soften the high spots. If it's been a few days, then you'll need to mechanically polish it off or use Gyeon Total Remover to remove and reapply coating on the affected area.

Any pH-neutral soap is suitable for use, and Gyeon recommends Bathe and Bathe+. Ideally, avoid using wash and 'wax' products. While you can use them, it's worth noting that a wash and 'wax' product tends to diminish the water-beading properties of your coating. This results in reduced hydrophobicity after washing. After all, who would want that?!

Officially, Gyeon recommends the product to be used within 2 to 3 years when new. If the bottle has been opened, it's best to use up the product within 6 months to preserve the coating's maximum effectiveness.

Yes, CanCoat EVO is extremely versatile. It can be applied on paint, trim, rims, metal, carbon fiber, or PPF/vinyl. For glass, avoid the front windshield, as certain wiper/washer fluid combos may chatter. Use Gyeon View or QuickView for a chatter-free experience.

No problem at all. Coatings contain a significant amount of solvents and exhibit high chemical stability. For more details regarding winter shipping, please refer to our FAQ section on winter shipping.

Yes, it does crystallize. It is a true SiO2 ceramic coating in a spray form. Because it crystallizes, we recommend doing a final inspection on each panel/section after application to avoid any "high spots."

To avoid clogged-up triggers, we recommend that after each application, you take the sprayer out and rinse it thoroughly with hot water. Make sure to put the metal cap back on and seal it tightly to avoid any crystallization inside the bottle.