Dr. Beasley's NSP 95 8oz

NSP 95 is a fully inorganic fine cut primer, engineered specifically to prime for ceramic nanocoating application. It removes scratches and oxidation, builds thickness and protects before coating application. Use NSP 95 to tackle scratches and oxidation of mild severity prior to finishing with NSP 45.

BUILDS THICKNESS FOR COATING DURABILITY NSP 95 adds thickness to paint while correcting

QUICKLY REMOVES SCRATCHES & OXIDATION Uses microsphere abrasives to eliminate scratches fast with exacting precision

PROTECTS WORK BEFORE COATING Protects paint while correcting to prevent scratches & contamination before coating

NO SILICONE OILS OR RESIDUE Zero organic content eliminates IPA/panel wipe step for better efficiency

FEATURING DxPRIME TECHNOLOGY

NSP 45 utilizes Dr. Beasley’s DxPrime technology to achieve total coating perfection. DxPrime uses advanced technologies like nanogel and microsphere abrasives to correct paintwork in a way that ensures a durable coating.

No silicone oils, wax or fillers — 100% body shop safe.
Builds thickness for more protection from the environment.
Protects work to resist scratches & stabilize surface.

Spherical shape maximizes cutting facets for fast results.
Sized at .95 microns to remove scratches & oxidation.
.5 micron size variance to ensure an even and consistent cut.

No organic content to ensure stable surface for coating.
Adds thickness for increased protection from coating.
Pairs with NSP 45 to lay anchor points for coating bond.

How it Works

NSP 95 corrects paintwork with microsphere abrasives to remove scratches, erase oxidation and build thickness prior to coating. NSP 95 should be finished with NSP 45 for optimal results. If paint defects are severe, use NSP 150 before using NSP 95 & 45.

DIRECTIONS
Nano Surface Primers enhance and optimize your current paintwork protection procedures. You may require less product and less time to achieve your desired results. Be sure to test and experiment with NSPs as you use them to develop a feel for what machine settings and pads work best for you.

System Instructions

1. Prep vehicle. For best results, wash with Dr. Beasley’s Premium Body Wash, decontaminate with Dr. Beasley’s Total Decon, Dr. Beasley's Clay Spray and clay bar. Tape off crevices and sensitive areas.
2. Tape off a section of the hood or any other flat panel. Visually inspect paint using a powerful light to determine severity of defects.
3. Based on your inspection, conduct 5-7 section passes using the least aggressive NSP and pad combination required to deliver the desired results. (For deep scratches, start with NSP 150. For fine scratches and oxidation, use NSP 95. For light micro marring and finishing, use NSP 45)
3A. Inspect again. If desired results were achieved, conduct another 5-7 section passes using the next NSP down in terms of aggressiveness, matching pad as necessary. Finish with NSP 45 and wipe the panel twice with a dry microfiber towel. Repeat steps going one small area at time until all paintwork has been buffed to desired results.
3B. If desired results were not achieved, conduct another 5-7 section passes using the next NSP up in terms of aggressiveness, matching pad as needed. When desired results are achieved, continue with 5-7 section passes using the next NSP down in terms of aggressiveness. Finish with NSP 45 and wipe the panel twice with a dry microfiber towel. Repeat steps going one small area at time until all paintwork has been buffed to desired results.
4. Wipe all panels again with a dry microfiber towel and continue to ceramic coating application. No IPA wipe or wait time is required beforehand.

Pad & Machine Recommendations
Nano Surface Primers are compatible with most pads and machines. If you are unsure whether a machine or pad is compatible, follow the above instructions and test on a small area before proceeding to the rest of the vehicle.

Dr. Beasley’s Suggests:
Not every job will need all three NSPs, so always perform a test panel first to determine the necessary NSP combination for the paintwork’s correction needs.
Do not use in direct sunlight.
For best results, follow with a Dr. Beasley’s ceramic nanocoating system.
Nano Surface Primers are compatible with other coating brands.