DIY Detail 1 Year Ceramic Graphene Coating is a TEOS-based ceramic coating that’s easy to apply, adds gloss, slickness, and long-term protection. The TEOS (Tetraethyl Orthosilicate) formulation helps reduce clogging and provides exceptional fracturing resistance, making this coating reliable and user-friendly for both enthusiasts and professionals.
Application can be done using either the included sprayers or dropper insert, the choice is yours.
DIY Detail 1 Year Ceramic Graphene Coating is safe and effective on a wide range of exterior surfaces, including:
- Automotive paint
- PPF and vinyl (gloss and matte)
- Glass
- Trim and chrome
- Wheels
Key Benefits
- 1 year ceramic graphene protection
- TEOS-based formula for improved durability and resistance to clogging
- Adds noticeable gloss and slickness
- Multiple application methods supported
- Compatible with paint protection film and vinyl wraps
Surface Prep:
- Start with a clean, dry, and fully decontaminated surface.
- Surface temperature must be above 40°F (5°C) and remain there for at least 1 hour.
- For best results, prep the surface using DIY Detail Panel Prep or C6 Ceramics Adhesion Promoter Polish (APP).
Spray / Towel Method:
- Spray several times onto a short-nap towel (Level 1) and spread over the surface to be protected.
- For additional panels, spray 3–4 times onto the towel.
- Allow the coating to flash, then level using a Freebird 400 towel.
Spray / Applicator Method:
- Spray several times onto a foam coating applicator and spread evenly over the surface.
- For additional panels, apply 3–4 sprays to the applicator.
- Allow to flash, then level with a Freebird 400 towel.
Dropper Method:
- Remove the sprayer and insert the dropper, ensuring it is seated properly.
- Apply 8–10 drops to the applicator and spread over the surface.
- For additional panels, apply 2–3 drops.
- Allow to flash, then level with a Freebird 400 towel.
Post-Application Care:
- Vehicle can return to service after 1 hour
- Wash using DIY Detail Rinse Less Wash after 3 days
- Full cure achieved in 7 days
- After application, remove the sprayer and spray back into the bottle to clear remaining coating. Clean the sprayer using DIY Detail Rinse Less Wash or DIY Detail Panel Prep.
