Bilt Hamber Traceless Window Cleaner
super-wetting Glass cleaner
Bilt-Hamber Laboratories use unique super-wetting, 100% evaporating surfactants to produce TRACE-LESS. These special surfactants leave no such residue. Unlike competing products that run quickly from vertical surfaces, TRACE-LESS instantly wets glass surfaces ensuring uniform application and minimal product run off.
The powerful, non-abrasive cleaners tackle greasy and dry particulate dirt more effectively than competing products. TRACE-LESS does not leave a hydrophobic coating and will not damage or remove quality glass sealants or rain repellents.
Dramatically Improve Surface Wettability
Unlike conventional glass cleaners that rely on water or alcohol-based carriers, TRACE-LESS uses super-wetting agents that aggressively penetrate and displace oily films, hydrocarbons, fingerprints, insect residue, and atmospheric contaminants. These surfactants lower the contact angle of water on the glass surface, allowing the solution to spread instantly and lift soils from the substrate.
Auto-Wheel
Bilt Hamber Auto-Wheel is a non-acid, non-alkaline alloy wheel cleaner, and in most cases, no agitation is required.
WetCoat
Gyeon WetCoat is essential for coating and maintaining wheels. It's a straightforward spray and rinse off process.
Evaporate Rapidly Without Residue
The formulation components are engineered to completely evaporate, leaving no residual film, streaks, or hazing. This controlled evaporation profile ensures that volatile components exit cleanly, removing contaminants with them, while minimizing surface adsorption that typically causes streaking.
Newly updated formula
Traditionally formulated glass cleaners contain non-evaporating surfactants and soaps (that wet and clean) plus glycols, perfumes and dyes. During cleaning these can be left behind causing stubborn streaking and smearing.
Bilt-Hamber Laboratories use unique super-wetting, 100% evaporating surfactants to produce TRACE-LESS. These special surfactants leave no such residue. Unlike competing products that run quickly from vertical surfaces, TRACE-LESS instantly wets glass surfaces ensuring uniform application and minimal product run off.
The powerful, non-abrasive cleaners tackle greasy and dry particulate dirt more effectively than competing products. TRACE-LESS does not leave a hydrophobic coating and will not damage or remove quality glass sealants or rain repellents.
Use on interior and exterior glass. Only use clean lint-free cloths free of detergents and fabric conditioners – these will cause smearing.
Tint safe.
Directions:
Important: SHAKE WELL BEFORE USE (product will streak if not, especially important for 5L jugs).
Use on cool glass out of direct sunlight. Avoid overspray onto surrounding surfaces.
For exterior automotive glass and general glass cleaning:
1. Atomise a fine mist on the surface and wipe off whilst still wet with a waffle weave microfibre or similar lint free cloth turned regularly – buff until dry.
2. For maximum smear free cleaning reapply a very fine mist and wipe dry with suede microfibre.
Note; If glass has stubborn sealant residue, embedded wiper film, hard water marks or other stubborn bonded soil polish first with good quality glass polish.
For interior automotive glass. Avoid overspray onto surrounding surfaces:
1. Spray directly onto waffle weave microfibre or similar and wipe over glass surface turning cloth regularly.
2. Where the highest degree of finish is desired. Repeat as above using suede microfibre.
Important! Shake well before use! (or you'll experience excess hazing)
Use on cool glass and out of direct sunlight. Avoid overspray onto surrounding surfaces, as heat will accelerate product evaporation. Trace-Less must remain on the surface without drying out in order to perform as intended.
TRACE-LESS is formulated with non-aggressive surfactants and is safe for tinted glass — meaning it does not contain ingredients generally associated with tint damage (e.g., harsh ammonia or strong alkaline solvents).
Bilt Hamber TRACE-LESS glass cleaner does not strip or remove existing window coatings, hydrophobic sealants, or rain-repellent treatments when used as directed.