Introducing the new & improved bigboi WASHR PRO MKII 20amp, a professional-grade pressure washer designed for the fussiest detailers. Equipped with advanced technology, including a Total Stop System (TSS), Brushless Induction Technology, and a commercial duty Italian designed Triplex forged brass pump head, this washer delivers a perfect combination of PSI and water flow rate. With a maximum pressure of 1200PSI and a flow rate of 2.0GPM, the WASHR PRO ensures an efficient and quiet operation, making it an indispensable tool for professional car care.

Don't Settle For Less. All pressure washers are not made equal. With a handful of expensive and awkward attachments, general use pressure washers might get the job done. But only the bigboi WashR PRO20 is designed and tuned specifically for automotive detailing.

Tuned To Perfection. Pressure washers made for the home and garden are not tuned the same as washers made for automotive detailing. Low pressure, high pressure and inconsistent flow can cause damage to your vehicle's paint and coatings. The WASHR PRO20 outputs a tuned rate of 1200PSI with a water flow rate of 2.0GPM, ensuring efficient cleaning every time.

Fully Serviceable. Most pressure washers come with an expiration date. After just 50-100 hours, a typical consumer pressure washer gives out. At around 200 hours of use, even semi-professional units may have to be replaced. This is not the case with the WashR PRO20. Our WashRs are designed to be fully serviceable, which means you can keep them running perfectly for years to come, even if you are washing multiple vehicles a day.

WASHR PRO20 DISCLAIMER:
The WASHR PRO20 has been purpose-built for commercial users and engineered to run on a dedicated 20 AMP circuit. This allows for significantly reduced noise, increased performance, and longer service life, perfect for professional detailing setups.

Two sets of nozzles are included in your box to help manage AMP draw, and in some cases may allow operation below 15 AMPs. However, using the WASHR PRO20 on a circuit rated below 20 AMPs is not recommended and may void your warranty.

*Please note you must use a wire braided hose - of equal or better spec than the bigboi Commercial Hoses. Using a flex hose can impact the performance of the Total Stop System and overtime damage your unit.