ArtDeShine Graphene Maintenance Coat 50ml

Brand: artdeshine

Product Code: 3032

Availability:In stock

$44.95 44.95

Graphene Maintenance Coat 50ml.

A Silicone Dioxide (SiO2) enhanced product that performs well as a maintenance solution for existing coatings, topcoat or standalone coating product. Extremely easy to use with unbelievable slickness. Convenience and compatibility with many products and all surfaces, saving you application time.  Harnessing the benefits of rGO, providing protection from corrosion and chemicals that can otherwise damage surfaces and coatings.  Water Repellence Contact Angle: 105° - 115°

In order to achieve the best shine and protection, Artdeshine formulates and manufacture specialised automotive care products that cannot be found elsewhere.  Graphene in its simplest form, at just one atom thick, is the lightest, strongest and thinnest material known to man. Its excellent properties make it a desirable substance to be incorporated into car coatings. While Graphene might seem perfectly suited for such applications, it is not an easy substance to work with and requires special techniques for it to disperse evenly in a liquid - absolutely required for it to be used effectively as a coating. Artdeshine is the first automotive care products brand to successfully harness the benefits of Graphene applied as a surface protection coating that exhibits enhanced tensile strength, durability as well as flexibility. Artdeshine's Nano Graphene coating is also extremely capable at reducing heat absorption, the main cause of ugly water etching spots that ruin the surface of your paint. It is also corrosion and chemical resistant, protecting your paintwork from bird droppings, tree sap, dead bugs and other harsh chemicals.

This is a lightweight coating serving as the perfect maintenance product for nanographene coatings.  Can be topped on other Ti/SiO2 coatings also to increase durability.

**Bottle does not come with applicators, you'll need to purchase them separately.**

Instructions:

  • Shake well (important), then apply enough products that'll create a fine oily film on a 2x2 ft section.
  • Must be applied in a shaded cool area.
  • Let it set for no longer than 30 seconds, then wipe off.  
  • If the ambient temperature is too hot and streaking starts to occur, either use the coating again on the area and wipe off right away (it uses the solvents to take the high spots off), or use a damp towel to remove streaks then buff with a dry towel.
  • Cures in 24 hours.
  • Can apply on top of BX or Nano Graphene Coating after base coat has cured for 4~6 hours.