Highly Resistant 87% Solids 99.9% Purity Quartz Coating

Armour PRO Quartz Coating is the epitome of high-performance protective coatings, delivering unparalleled protection in a single layer application. With a solids content of 87% (SiO2) at a purity of 99.9%, the coating provides the highest level of protection available to consumers.

The advanced formula of Armour PRO Quartz Coating creates an extremely hard and resistant layer that protects your surfaces from stains, bugs, sap, etching, and scratches. The exceptional slickness of the surface helps repel dirt, making maintenance of your vehicle effortless and safe. The coating can be applied as a single layer, or as a base layer for the standard Armour Coating for added benefits such as increased slickness, gloss, self-cleaning, and extreme hydrophobic properties.

With real-world protection of 5+ years in a single layer, Armour PRO Quartz Coating offers an unparalleled solution for enhancing the appearance and protection of your vehicle. Whether you are a seasoned professional or a DIY enthusiast, the coating's top-of-the-line formula and user-friendly application process make it the ideal choice for anyone looking to take their vehicle protection to the next level.

What's Included:

30ml Armour Quartz PRO Coating w/ Dropper Top
(1) Microfiber Coating Application Pad
"How To" Direction Card

Directions:

1. After thorough prep prime the applicator with 3 lines start and each subsequent application will only need a small amount, a little goes a long way. 

2. Apply Armour PRO Coating 1 panel at a time. Initially create an "X" pattern on the panel, then box in all edges to allow for even distribution of the coating. Follow through the panel with small overlapping circles (like a wax) making sure to have even, level coverage. Allow the product to “set up” for 1-5 minutes depending on temperature/humidity (generally 2-3 minutes). Look for light hazing to appear before removing.

3. In a small circular motion level coating 95%+ on 1st wipe (short nap, pearl weave), the first wipe will have a slight grab to it, but the product should be picked up easily. If the coating begins to smear, it needs additional time to setup. If the product is very hard to remove, it needs less time before removal. Switch to 2nd towel (plush) for final leveling. Check for any streaks, or high spots which can appear as cloudy or dark spots. Repeat this process per panel.

4. While using Armour PRO, you will need to switch to a fresh side on your applicator every 3-4 panels, as the coating is so concentrated, it starts to cure hard in the applicator.

5. Use a fresh side of your removal towels every other panel. You may need 2 (1st wipe) towels when using Armour PRO.

Allow 1-2 hours if you choose to layer Armour Quartz Coating on top of the Armour PRO Coating.