3D GLW SiO2 Ceramic Wax 16oz
3D GLW Series SiO2 Ceramic Wax is a liquid paint-protection product that combines wax application with ceramic-inspired hydrophobic properties. It enhances gloss and slickness on a prepared finish while helping water bead and routine dirt release during washing.
Key benefits
- SiO2-infused liquid wax for glossy paint protection.
- Wipe-on application followed by microfiber buffing.
- Can complement compatible existing ceramic protection.
Choosing and using this product
Apply to clean paint after any required decontamination or correction. Use a thin layer and follow the bottle for bonding and removal time. It is a wax treatment, so do not assume the installation process or service life of a dedicated ceramic coating. Where applying over a coating, check the coating maker’s maintenance guidance.
How to use
- Wash and dry the vehicle. Remove bonded contamination where needed and complete any polishing before applying protection.
- Work on cool paint in shade. Test a small section and prepare clean applicators and soft microfiber buffing towels.
- Apply a thin, even layer using the method allowed on the label. Avoid heavy deposits around badges, panel seams and textured trim.
- Allow the product to set according to its directions and the conditions. Buff away residue with a clean towel, turning to a fresh face often.
- Inspect the finish under different lighting and remove remaining residue. Follow any stated curing requirements before washing or exposing the vehicle to weather.
Aftercare and maintenance
Wash regularly with a suitable car shampoo and clean tools. Remove contamination promptly rather than relying on a protective layer to resist it indefinitely. Reapply when the finish needs refreshing, taking account of washing habits, storage and weather. Clean applicators and towels after use so dried residue is not carried into the next detail.
Frequently asked questions
Does wax remove scratches?
Wax and sealant protect and enhance the finish. Defect removal requires a suitable abrasive process before protection, unless the product is specifically an abrasive all-in-one polish.
Should I apply a thick coat?
A thin, even application is easier to spread and remove consistently. Excess product increases residue without replacing proper surface preparation.
Related 3D products
Complete your detailing routine with 3D ONE Hybrid Compound & Polish, 3D GLW SiO2 Ceramic Wash 16oz, 3D HD POXY Montan Wax & Sealant 16oz.
