3D Ceramic Coating+ Graphene Infused 30ml
3D Ceramic Coating+ is a graphene-infused ceramic coating for prepared automotive paint. It adds gloss and a water- and oil-repellent surface that can make routine maintenance easier. 3D describes the coating as offering up to three years of protection, with actual durability depending on preparation, application, exposure and care.
Key benefits
- Graphene-infused paint-protection formula.
- Hydrophobic and oleophobic surface behaviour.
- 30ml coating for a dedicated protection detail.
Choosing and using this product
Choose a bottle coating when you can complete careful preparation and provide the required installation and curing conditions. It is a different process from a quick detail spray. Apply only to surfaces approved by the supplied directions and use those directions for the exact flash time, water exposure restriction and first-wash interval.
How to use
- Wash thoroughly, remove bonded contamination where needed and dry the vehicle. Complete any paint correction before coating; the coating will preserve the underlying appearance rather than remove swirls.
- Prepare the surface with the coating system’s recommended panel-preparation process. Remove polishing oils and residue, then work in a clean, sheltered area on cool panels.
- Read the supplied application directions before opening the bottle. Apply a small, even amount using the specified applicator or spray method, treating a manageable section at a time.
- Level and remove surplus within the product’s stated flash window. Lighting, temperature and humidity affect how easily excess product can be seen and removed. Check adjacent angles for high spots.
- Follow the product-specific cure instructions before exposing the finish to water, weather or washing. Keep the vehicle sheltered for the required period and avoid applying unapproved products over the fresh coating.
Aftercare and maintenance
Once cured, wash with a coating-compatible shampoo and clean, soft tools. Dry after washing and remove bird droppings or other concentrated contamination promptly. Use a compatible maintenance product when needed, following its instructions. Water repellency can change as dirt accumulates, so clean and inspect the coating before deciding it needs another application.
Frequently asked questions
Does ceramic coating make paint scratch-proof?
No. It adds a protective surface treatment but cannot prevent all scratches, chips or mineral spotting. Careful washing and prompt contaminant removal remain important.
Can I skip polishing?
Polishing is needed only when you want to correct defects, but the surface must still be clean and properly prepared. Inspect the finish first because a coating does not remove existing swirls.
Related 3D products
Complete your detailing routine with 3D ONE Hybrid Compound & Polish, 3D GLW SiO2 Ceramic Detailer 16oz, 3D Pink Car Soap 128oz.
