The next evolution of protection is here!

CLEAN By Pan CERAMIC SPRAY COATING delivers outstanding gloss, extreme slickness, and high-performance hydrophobic protection in a fast, effortless spray application. Built from the same advanced base resin found in Pan’s professional ceramic coatings, this formula forms a dense silica backbone for exceptional durability, clarity, and chemical resistance.

The result? A 1-year ceramic spray coating with higher gloss, smoother slickness, and 110° water contact angle beading—all without the intensive prep required by traditional coatings. 

Safe for paint, wheels, glass, trim, PPF, vinyl, lights, and matte finishes. PFAS-free and incredibly efficient, offering up to 3–6 full vehicles per 3 oz bottle.

Whether you’re a pro detailer or an enthusiast, this is the ultimate blend of performance, simplicity, and eye-catching results.

DIRECTIONS:

1. Wash the vehicle using CLEAN By Pan Shampoo and dry thoroughly.

2. Optional: If needed, perform paint decontamination using CLEAN By Pan Iron Remover and the CLEAN By Pan Clay Towel.

3. Optional: If the paint is faded, oxidized, or contains scratches or swirls, proceed with paint correction using CLEAN By Pan Spray Polish and appropriate pads.

4. For maximum bonding and durability, remove remaining polishing oils and residues using CLEAN By Pan Panel Prep Spray. Wipe clean with a microfiber towel.

5. Apply the coating:

   • Spray a liberal amount of CLEAN By Pan Ceramic Spray Coating onto a CLEAN By Pan Level One microfiber towel or applicator.

   • Spread evenly over the surface using a cross-hatch pattern.

   • Allow the coating to self-level for 1–2 minutes, then remove any excess with a CLEAN By Pan Final Level microfiber towel.

   • An additional layer may be applied within 1 hour of the initial application.

6. Curing: Allow 1 hour of dry time before exposing the vehicle to water or rain.

7. Applying as a sacrificial topper over CLEAN By Pan 3-Year or 8-Year Ceramic Coatings:

   • Wait 12 hours after applying the base ceramic coating, then apply the ceramic spray coating on top.

FEATURES

• 1-Year Ceramic Protection
  Hybrid organic–inorganic silica film.

• Ultra-High Gloss & Extreme Slickness
  Even glossier than Pan’s ceramic coatings with a buttery smooth finish.

• 110° Water Contact Angle
  Sharp, tight water beading and outstanding hydrophobic performance.

• Fast Water-Ready Cure
  Water and rain safe in just 1 hour at room temperature.

• Strong Chemical Resistance
  pH 2–12 after full cure (7 days).

• Minimal Prep Required
  Bonds even on non-decontaminated surfaces thanks to enhanced adhesion promoters.

• Multi-Surface Application
  Safe for paint, wheels, glass, plastic trim, lights, PPF, vinyl wraps, and matte finishes.

• PFAS-Free Formula
  Safe to use.

• Extremely Efficient
  3–6 full vehicles per 3 oz bottle, depending on technique.