The Ceramic Top Coat that Wows.
This is a professional top coat TACSYSTEM released for public use due to limited certified installers in certain regions.
Top Coat 2.0 is a durable, glossy, and hydrophobic inorganic coating layer designed to protect all exterior vehicle surfaces, including paint, plastic, and glass. While Top Coat 2.0 was engineered as a top layer (topper) to an existing coating, it works impressively well as a stand-alone coating offering a year of superior gloss, shine, and hydrophobic properties to paint, allowing for ease of vehicle maintenance. It contains Silica, Hydrocarbon, Titanium, Zirconium and Fluorine under advanced nanotechnology.
TAC Top Coat 2.0 is the most advanced surface care enhancement product come from Korea. In fact, it is much different. This Coating provides the best protection on multiple surfaces, including paint, plastic, glass, and wheels. This TAC Top Coat 2.0 will be well protected your car against the harmful effects of nature.
(In a well lit, temperature controlled below 25°C, & contamination free environment)
(Suggested section size: 1 panel at a time) Applicator Limit - Hood Size, spread evenly over the section, allow dwell time within 30 seconds, then wipe off with new micro fiber towel. Applicator Limit 1/2 Hood Size area - then change.
1. Clean and dry all exterior vehicle surfaces thoroughly. Apply out of direct sun to cool vehicle panels.
2. With a dedicated micro fiber suede ormicro fiber applicator pad, apply a small amount of Top Coat 2.0 to the applicator then begin to work it in, one panel at a time. It spreads out very well, a little goes a long ways.
3. Once applied allow Top Coat 2.0 to dwell within 30 seconds, then using a clean softmicro fiber towel, buff the surface until all excess product is removed.
Tips / Alternate Uses:
Can be used as a stand alone coating and also topped with Quartz Max.
Max Efficiency (not required):
Cure Top Coat2.0 with IR lampsat 50°C-60°C for 30 minutes.
Post Application Instructions:
Top Coat 2.0 requires 3-4 hours of cure time before water exposure.
Included:
1x TOP COAT 2.0 50ml
5x Suede 10cm x 10cm
1x Suede 30cm x 30cm
1x Coating Block
