Q² LeatherShield is an advanced SiO₂-based formula specially developed for all types of modern automotive leather upholstery. It provides superb protection against dirt, UV rays, and the rigors of everyday usage. Q² LeatherShield is amazingly simple to apply, requiring only one layer. It has been designed for and tested on all modern types of leather, providing great protection without changing the feel or color, leaving a fully matte finish. Q² LeatherShield does not stiffen the leather or make it more slippery, maintaining the regular comfort of use. Do not use on open structure, aniline, or semi-aniline leather upholstery
Ensure you clean the leather well and remove any excess cleaner. We highly recommend using one of our Q²M LeatherCleaners. Make sure to conduct a test panel before applying the product to the entire upholstery.
TIP: Apply the product to one panel at a time, ensuring even coverage. Do not wipe off. If you notice the product drying unevenly, level it without adding more liquid. Check after 20 minutes, and if necessary, wipe.
preparation
Prep is key to removing all soils and ensuring proper coating adhesion.
GYEON Leather Shield provides strong resistance against dye transfer, fading, and UV damage. This is essential, especially if you have white Tesla seats (works on vegan leather), which are notorious for dye transfer. It also acts as a shield to protect against sunscreen, makeup, and spills. Dries to a matte OEM finish.
Scroll down for detailer reviews and FAQs.
GYEON Leather Shield 100ml
Advanced quartz technology combined with user friendly characteristicsGYEON Quartz
Note: Not for Ford King Ranch Leather, or any leather that’s uncoated. You can test this by dropping water on the leather, if it absorbs into it and darkens (like suede), then do not use this products. Uncoated, or “unfinished” leather is very rare in automotive finishes, mainly found in some high end home furniture.
Advanced quartz coating specially formulated for automotive leather. Q² LeatherShield is suitable for every type of leather produced to date and does not change the finish of your upholstery. Very easy to apply, only one layer required. Repels dirt and prevents discoloration, protects against liquids and UV-rays.
Q² LeatherShield is an advanced, SiO2 (silicon dioxide) based formula, specially developed for automotive leather upholstery. It provides superb protection against dirt, UV rays and the rigors of everyday usage. Q² LeatherShield is amazingly simple to apply, requiring only one layer. It’s designed for and been tested on all modern types of leather, providing great protection and no change of feel or color, leaving a fully matte finish. Q² LeatherShield does not stiffen the leather or make it more slippery, maintaining the regular comfort of use.
ADVICE ON APPLICATION AND PRECAUTIONS
Clean leather with Q²M LeatherCleaner. Apply a moderate amount of the product with the attached suede applicator. Ensure even application. Wipe off if necessary or just leave to dry. Apply on a hardly visible part of the upholstery to test before coating. Q² LeatherShield is a coating developed for all types of leather upholstery to date. Before use on open-structure, aniline leather, proceed with a test panel and be extraordinary carefull about even application. Please note, that Q²M LeatherShield is a product designed for protection and not restoration. It will not show its full abilities on old, worn or damaged leather.
DURABILITY: ★★★★★
BEADING: ★★★★★
SELF-CLEANING: ★★★★
Applying GYEON Leather Shield is a little different than applying paint coatings. Leather Shield does not require a buff off; simply apply it and let it get absorbed into the leather and will dry by itself. It's that easy.
All GYEON coatings can be applied outdoors. Ensure stable conditions, never use in direct sunlight and check the weather forecast!
Will not block or plug perforated seats. As you can see from the picture above, it actually prevents liquids from entering the perforation!
GYEON Leather Shield FAQs
This depends on several factors. On high-wear areas such as the driver's seat, it can last up to a year, whereas the back seats that see less traffic can expect 1-2 years, longer if maintained with GYEON Leather Coat.
You don't! Simply apply and let the liquid dry on its own to achieve an even, streak-free matte finish.
At least 1 hour after drying, usually between 1 to 6 hours.
Will use anywhere between 25 to 35ml per coat (5-seater), depending on whether you're covering the door inserts and other areas or not.
Leather Shield can only be applied to soft-touch materials, whether vinyl or leather, but it must be a soft-touch surface and not hard trims.
At least 24 hours after drying. Of course, the longer you let it cure, the better. However, there's no need to wait a week; after 48 hours, it should be fully cured.
A temperature of at least 10°C is recommended, although you can still attempt the application between 5°C to 10°C if necessary. If the temperature reaches 30°C, then it's on the warmer side, and you will need to retreat into the shade.
It does, but if you're asking because you're worried that it may distort the 'new car smell,' then fear not—the light coating smell will dissipate in a day or two.
You can use products like Gyeon Leather Coat, Interior Detailer, Leather Cleaner etc., as frequently as you'd like.
You won't get high spots with Leather Shield; it dries to a matte finish. If it does happen, you won't be able to see or feel it anyway.
Officially, Gyeon recommends the product to be used within 2 to 3 years when new. If the bottle has been opened, it's best to use up the product in 1 to 2 months to preserve the coating's maximum effectiveness.
No problem at all. Coatings contain a significant amount of solvents and exhibit high chemical stability. For more details regarding winter shipping, please refer to our FAQ section on winter shipping.
No, it does not. Don't think of it as putting a layer of 'something' on top of the leather. How Leather Shield works is that it gets absorbed into the pores instead, not forming a 'thick layer of something' on top of the surface. Your leather will still be breathable after coating.
Indeed, one of the best. It's hard to find a product that's so easy to apply, won't leave high spots, is durable, and cures to a matte OEM finish. There's a reason why this is one of GYEON's signature products. It can also be used on bike leather jackets to make bug cleaning easier.
Just keep in mind that it can be applied to most leather finishes, but not to aniline or semi-aniline leather. Basically, the leather surface needs to feel 'smooth' like a car seat and not 'fuzzy'.
