PROTECTS ANY TYPE OF Automotive LEATHER
A uniquely formulated ceramic coating designed specifically for automotive leather, Q² LeatherShield EVO is suitable for all modern leather upholstery. It is remarkably easy to apply and does not alter the appearance or texture of your upholstery. It forms a protective layer that repels dirt, prevents discoloration, and provides protection against liquids and UV rays.
CONSUMPTION: 30-40ml/car
PH TOLERANCE: pH 2-11
DURABILITY: 18months / 30K km
BEST PRACTICES & PRO-TIPS
Ensure thorough cleaning of the leather, removing any excess cleaner. We highly recommend using one of our Q²M LeatherCleaners. Before applying the product to the entire upholstery, conduct a test panel.
TIP: Apply the product to one panel at a time, ensuring even coverage. Do not wipe off. In case you observe uneven drying, level the product without adding more liquid. Check after 20 minutes; if necessary, wipe. For advanced users, we recommend using a Q²M MF Applicator.
preparation
Prep is key to removing all soils and ensuring proper coating adhesion.
Deep clean
Using leather cleaner in conjunction with a horsehair brush ensures that all the pores are thoroughly cleaned.
Maintenance
GYEON Interior Detailer is gentle enough not to harm Leather Shield, making it a prime candidate for maintenance.
Dye and UV resistant
GYEON Leather Shield provides strong resistance against dye transfer, fading, and UV damage. This is essential, especially if you have white Tesla seats (works on vegan leather), which are notorious for dye transfer. It also acts as a shield to protect against sunscreen, makeup, and spills. Dries to a matte OEM finish.
Scroll down for detailer reviews and FAQs.
GYEON Leather Shield EVO - WORLD’S FIRST COATING FOR AUTOMOTIVE LEATHER - NOW RE-INVENTED.
A uniquely formulated ceramic coating designed specifically for automotive leather, Q² LeatherShield EVO is suitable for all modern leather upholstery. It is remarkably easy to apply and does not alter the appearance or texture of your upholstery. It forms a protective layer that repels dirt, prevents discoloration, and provides protection against liquids and UV rays.
PH TOLERANCE: pH 2-11
DURABILITY: 18months / 30K km
Applying GYEON Leather Shield is a little different than applying paint coatings. Leather Shield does not require a buff off; simply apply it and let it get absorbed into the leather and will dry by itself. It's that easy.
All GYEON coatings can be applied outdoors. Ensure stable conditions, never use in direct sunlight and check the weather forecast!
Will not block or plug perforated seats. As you can see from the picture above, it actually prevents liquids from entering the perforation!
Q² LeatherShield EVO represents an advanced and reworked SiO2-based formula specifically developed for all modern automotive leather upholstery types. It offers excellent protection against dirt, UV rays, and the demands of daily use. This new formula is remarkably easy to apply, requiring only one layer. Tested on and designed for all modern leather types, it ensures substantial protection without altering the feel or color, leaving a fully OEM matte finish. Q² LeatherShield EVO does not stiffen, clog leather pores, or create a slippery surface, preserving the regular comfort of use. Note: Avoid using on open structure, aniline, or semi-aniline leather upholstery. For such surfaces, use Q² LeatherCoat REDEFINED.
GYEON Leather Shield FAQs
This depends on several factors. On high-wear areas such as the driver's seat, it can last up to a year, whereas the back seats that see less traffic can expect 1-2 years, longer if maintained with GYEON Leather Coat.
You don't! Simply apply and let the liquid dry on its own to achieve an even, streak-free matte finish.
At least 1 hour after drying, usually between 1 to 6 hours.
Will use anywhere between 25 to 35ml per coat (5-seater), depending on whether you're covering the door inserts and other areas or not.
Leather Shield can only be applied to soft-touch materials, whether vinyl or leather, but it must be a soft-touch surface and not hard trims.
At least 24 hours after drying. Of course, the longer you let it cure, the better. However, there's no need to wait a week; after 48 hours, it should be fully cured.