THE MOST ADVANCED NANOTECHNOLOGY INFUSED COATING ON THE MARKET
Graphene Matrix creates an extremely durable protective coating with superior strength, flexibility and repellency that enhances and maintains vehicle finishes. A revolutionary DIY coating with cutting edge Graphene technology that creates remarkable shine and protects any vehicle effortlessly.
REVOLUTIONARY TECHNOLOGY INFUSED WITH GRAPHENE
Graphene Matrix utilizes an innovative Graphene Oxide composite that bonds to form an impenetrable layer of protection. Our unique chemistry makes Graphene Matrix easier to install than ever before. Graphene Matrix does not harden or crystallize like normal ceramics, reducing the risk of potentially irreversible high spots or streaking.
5 YEARS OF PROTECTION
Graphene Matrix Coating durability is rated in years, not months like many spray on “Coatings”. Once applied, Graphene Matrix forms a permanent bond to the finish protecting and repelling contaminants.
HYDROPHOBIC NANOTECHNOLOGY
Graphene Matrix Coating's unparalleled ability to resist contamination is due to its extremely high surface sheer angle, shedding water and contaminants while reducing the risk of etching, water spotting, and staining. In addition to its resistance to abrasion, weathering, and oxidation, Graphene Matrix Coating creates a layer that forms an almost impenetrable barrier on top of the surface once applied. Future maintenance, such as clay barring and light polishing to repair possible imperfections in the coating, can be performed without sacrificing its integrity, resulting in the ability to finally achieve a near-permanent coating.
HOW TO APPLY
Make sure the surface has been completely cleaned and decontaminated with Ethos Detox. The cleaner the surface, the better the bond!
-
Shake bottle well.
-
Apply a few drops of Graphene Matrix onto your applicator until evenly covered.
-
Starting with horizontal / top surfaces first, applying in straight lines slightly overlapping from one line to the next. Work in small areas approximately 3'x3' or the size of a door or half a hood at a time. Temperature and humidity will determine coverage areas allowable between application and removal.
-
Applicators should glide smoothly on the surface while laying down an even layer of coating. If the applicator starts to drag or the application becomes inconsistent, apply additional drops to the applicator.
-
Immediately after application, you will notice a “Rainbow Effect” (More prevalent on dark colors) while the applied coating bonds to the surface. Roughly 1-3 min after application, the "Rainbowing" will start to turn into a haze/fog, this means the coating is ready for removal. (Temperature and humidity will expedite the flash time. Test a small area first before continuing onto the rest of the vehicle)
-
Using premium microfiber towels, thoroughly wipe down the section to remove the Graphene Coating residue. Your first wipe should remove about 80% of the residue, and your second wipe should easily remove the remainder. Use small, circular motions and little to no pressure during removal.
-
IMPORTANT: Be sure to check adjacent panels to make sure you haven't "pushed" excess coating to other areas. (We recommend using a flashlight or smartphone light for inspection to make sure every bit of residue is gone. If you fail to remove all of the residues during the flash time, it will become a dark spot once it cures and can require polishing or compounding to remove) So be thorough and continue to check your work before moving onto the next step.
-
Repeat these steps as you move along the rest of your vehicle. Coating the paint, plastics, trim and glass surfaces in the same manner.
-
Let the coating fully dry/cure for at least 48 hours before allowing it to get wet. The longer it stays dry the better, as it will continue to cure for about 5 days (you CAN drive the car during this time).
