CARPRO Lift

CARPRO Lift Snow Foam 500ml - CARZILLA.CA
CARPRO Lift - CARZILLA.CA
CARPRO Lift - CARZILLA.CA

CARPRO Lift

Regular price $26.95 CAD
CAD /
Carpro

3%+ Discount with 3+ of the Same Item

3%+ Discount with 3+ of the Same Item

Shipping calculated at checkout.
  Ask about this product Add to Compare Products Add to Compare
Earn 1 Point on this purchase. Learn more
×

Strong pre wash

carpro lift high pH strip wash with good foaming action

Potent and high foaming

CARPRO Lift utilizes 12pH alkyl cleaning ingredients, which are both strong and gentle, making it suitable for use with all pressure foam lance washers. Applied at a typical 1:10 dilution ratio (or others depending on the desired foam viscosity), CARPRO Lift is designed to dwell on surfaces for approximately 5 minutes.

It is formulated specifically to provide maximum wetting, and it rinses off easily with out soap residue.

IronX + Foam

Try IronX Foam Wash, which foams with a foam cannon and decontaminates at the same time.

Shop CARPRO IronX Snow Soap

pH Neutral wash

Looking for something gentler to wash your ceramic coating? CARPRO Reset is your go-to solution.

Shop CARPRO Reset

Waterless wash

Looking for a quick touch-up with a waterless wash instead? CARPRO EcH2O cleans and protects simultaneously.

Shop CARPRO EcH2O
carpro lift snow foam with MJJC foam cannon produces insance amounts of suds

Application

Dilute Lift with water. We recommend a ratio of 1:10, but you can adjust for a more flowing mixture or a denser foam by using leaner or richer ratios, respectively. Always allow the product to dwell on the surface for a few minutes before rinsing – the longer, the better. Do not allow the product to dry, even when diluted. Rinse and wash the car with CARPRO Reset.

Scroll down for detailer reviews and FAQs.

Lift uses 12pH alkyl cleaning ingredients, which are strong yet gentle and suitable for use with all pressure foam lance washers. Applied at a typical 1:10 dilution ratio (or others depending on the desired foam viscosity), Lift will dwell on surfaces typically for 5 minutes. Lift is formulated specifically to offer maximum wetting and rinses easily as well. It is not a superficial high foaming product but has been designed as a true active surface agent.

During the panel dwell period, Lift’s bubbles will burst and move, encouraging soaking and cleansing agents to start working. They lift road grime, by binding with our proprietary blend of surfactants.

HOW TO USE

• Use on cool surfaces. Dilute Lift with water (we recommend 1:10). You can use leaner ratios for a more flowing mixture or richer for a denser foam.
• Always allow the product to remain on the surface for a few minutes before rinsing – the longer the dwell time the better. Do not let the product dry, even when diluted
• Rinse and wash with CARPRO Reset

Lift is a stronger pre-wash and may strip general waxes/sealants at 1:10.

Dilute at a ratio of 1:10 in a foam cannon or handheld foaming pump.

While it won't cause harm, choosing CARPRO Reset would be more cost-effective. CARPRO Reset prioritizes slipperiness for the contact wash stage.

Not immediately. However, it's important to note that CARPRO Lift is a higher pH soap designed to thoroughly clean as much dirt as possible. When using a higher pH solution, it may have a slight impact on your waxes, sealants, or coatings. To maintain and restore the protective layers, be sure to apply something like CARPRO Reload 2.0 or Elixir after use.

Merely foaming and rinsing will not ensure the vehicle is 100% clean; often, you'll need to follow up with a contact wash to remove heavier traffic film.

Can pre-treat it with CARPRO IronX or TarX prior to using Lift to increase cleaning power.

This site is protected by reCAPTCHA and the Google Privacy Policy and Terms of Service apply.