CARPRO DarkSide Tire Coating

carpro darkside 500ml
carpro darkside 1L
CARPRO DarkSide - CARZILLA.CA
carpro darkside 4L
carpro darkside 500ml
carpro darkside 1L
CARPRO DarkSide - CARZILLA.CA
carpro darkside 4L

CARPRO DarkSide Tire Coating

Save $4.05
/
Carpro

3%+ Discount with 3+ of the Same Item

3%+ Discount with 3+ of the Same Item

Shipping calculated at checkout.
  Ask about this product Add to Compare Products Add to Compare

Earn [points_amount] when you buy this item.

×

Long lasting tire shine

DarkSide's 60% polydimethylsiloxane formula allows for a super quick and easy application with our dedicated tire or microfiber applicators, leaving a beautiful satin shine. Needless to say, it is equipped with all of our famous self-cleaning, hydrophobic properties, as well as UV and chemical resistance, prolonging the new look of your tires.

Every quick application of DarkSide will last up to 3 months!

carpro darkside tire coating dressing
carpro darkside hydrophobic on tires

Hydrophobic

DarkSide not only dresses and restores; it also provides a very high degree of water beading effect, keeping your tires cleaner by automatically repelling dirt and soils.

Once applied, it will provide a factory OEM satin finish without being overly greasy.

Tire Cleaner

Make sure to clean your tires well and remove all the old dressing and browning before applying Darkside.

Shop CARPRO Retyre

Premium Wheel Brushes

CARPRO's low-profile wheel brushes will get into all the nooks and crannies.

Shop CARPRO Wheel Brush Set

Water-based dressing

Dilutable dressing for tires, rubber, plastics, and leather. Protects and restores.

Shop CARPRO Perl

Preparation

Preparation is key; the cleaner the surface, the better any product will bond and perform.

  • Clean and dry tyres thoroughly with CARPRO Retyre.
  • Squirt DarkSide 2-3 times on a tyre applicator or CARPRO MF Applicator and apply evenly over the tyre wall.
  • Avoid water contact and allow to dry for 1-2 hours.
  • Layerable after 1-2 hours.

Scroll down for detailer reviews and FAQs.

If only you knew the power of the dark side...

CARPRO DarkSide is a new ready-to-use, highly concentrated tyre and rubber sealant.

DarkSide’s 60% polydimethylsiloxane formula allows for a super quick and easy application with our dedicated tyre or microfibre applicators, leaving a beautiful satin shine look. Needless to say, it is equipped with all of our famous self-cleaning, and hydrophobic properties, as well as UV and chemical resistance, prolonging the new look of your tyres.

Every quick application of DarkSide will last up to 3 months!

  • HIGHLY HYDROPHOBIC
  • SATIN BLACK SHINE
  • 3+ MONTHS DURABILITY
  • UV-RESISTANT
  • LOW VOC

Directions:

  • Clean and dry tyres thoroughly with CARPRO ReTyre.
  • Squirt DarkSide 2-3 times on a tyre applicator or CARPRO MF Applicator and apply evenly over the tyre wall.
  • Avoid water contact and allow to dry for 1-2 hours.

When properly applied (we recommend two coats), it will last up to 10 washes, translating to 2-3 months of durability.

CARPRO Darkside will produce a satin finish but can be further buffed down to a light satin. It will dull down over time to a deep matte finish.

No, it will not sling. The reason why something will sling is if too much product is applied without buffing it down. Also, ensure there are no products in the tire treads; make sure those are cleaned up as well.

Perl is water-based and can be safely used on the interior surfaces of your vehicle, even on leather. DarkSide, on the other hand, should only be used on exterior surfaces such as tires.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.