Supplied with a 145mm application straw.
Dynax-UB is a high-performance anti-corrosion wax that provides exceptionally long-lasting protection to steel surfaces.
Dynax-UB contains elastic polymers that create a tougher wax coating that is more resistant to abrasion than normal wax coatings – this property enables this wax to protect vehicle undersides for prolonged periods.
Unlike traditional bitumen underseals Dynax-UB will not peel. Peeling underbody coatings trap water against the steel surface, accelerating corrosion.
Dynax-UB forms a touch-dry, brown, wax-like film.
Dynax-UB is able to arrest existing corrosion and to provide long-term protection to pre-corroded and corrosion-free surfaces.
Dynax-UB substantially outperforms competitive material in salt-spray trials under conditions of ASTM B117. Salt-spray performance should never be overlooked as vehicle undersides and cavities are always exposed to this attack from winter road salt.
Use a brush or roller to apply Dynax-UB. Dynax-UB should be applied to dry surface free of loose, flaky rust or coatings, although the highly polar corrosion inhibitors will arrest existing corrosion.
Dynax-UB will vary in viscosity with temperature; it may appear to have a soft grainy appearance to firm gel. Apply at least two coats to the surface at 24 hr intervals. This first primes the surface and allows subsequent coats to build higher film thickness.
Dynax-UB will provide excellent protection at a wide-range of film thickness. Aim to achieve a uniform dry-film thickness of around 80 – 100 microns.
