Bilt Hamber Dynax-S50 750ml
Extreme duty anti-corrosion wax for cavities, voids and long term protection.
Supplied with a 600mm application lance.
Dynax-S50 is a high-performance anti-corrosion wax that provides exceptionally long-lasting protection to steel surfaces. It creeps into welded seams and seals surface defects. Dynax-S50 forms a soft, brown, wax-like film that self-heals in the event of disruption. It is also able to arrest existing corrosion and to provide long-term protection to pre-corroded and corrosion-free surfaces.
Dynax-S50 has been proven to substantially outperform competitive material in salt-spray trials under conditions of ASTM B117.
Dynax-S50’s soft-film is optimised for enclosed cavities where extremely corrosive conditions develop. Dynax-S50 is also recommended for protection of valuable machinery and components in transit, machine tools, moulds etc. Dynax-S50 can be removed using suitable solvent. Dynax-S50 is not formulated for prolonged exposure to ultra-violet (UV) light.
The advanced metal seeking anti-corrosion molecules which form Dynax-S50 are able to displace water, so even damp surfaces can be protected, these same molecules arrest and prevent corrosion even on already rusty surfaces and provide remarkable self-healing abilities if the film is damaged. Whilst Dynax-S50 is primarily a cavity rustproofing compound it’s also able to prevent corrosion in a multitude of mud traps and water collecting voids. Dynax-S50 has been used with superb results to protect voids and cavities in steel boats, vessels, offshore installations and other steel structures subject to severely corrosive atmospheres.
Dynax-S50 is designed to protect steel surfaces in extreme conditions. It’s well known that vehicle cavities are subject to a wide-range of corrosive environments, from salt spray to high humidity, heat, fresh water and freezing. The cavity wax chosen must cope with all these variables and continue to provide the necessary protection – maintaining the structural integrity, safety, and value of the vehicle. It’s common for manufacturers of cavity waxes to quote salt-spray results in hours for their cavity waxes and while the salt-spray test is severe it’s been shown that waxes with very good salt-spray performance can rapidly deteriorate when the environment changes, for example after a period of constant salt-spray they swell become bloated and detach from the surface in an atmosphere of high humidity alone. Dynax-S50 has been proven to provide outstanding salt-spray protection and continuing protection in changing conditions with no swelling or detachment whatsoever. You’ll see below how Dynax-S50 compared with two extremely well known cavity waxes in constant salt spray trials.
Class-leading long-term protection for cavities, voids, chassis, doors, mud traps machinery, boats etc.
Resistant to changing conditions found in cavities, others are not.
Self-healing, protects even if film is cut.
Clings to vertical surfaces.
Kills existing corrosion.
Deeply penetrates flanges and folded seams.
Easy to use – atomises superbly.
See-through coating with brown tint.
Available in ready to use modular injection system.
How To Use
Use a brush, roller or spray to apply Dynax-S50. Atomisation into enclosed cavities and voids is recommended to ensure thorough coverage of all surfaces. Dynax-S50 contains highly polar corrosion inhibitors that are able to displace surface moisture; very wet surfaces should be pre-treated using Bilt-Hamber Ferrosol.