Before the Next Drive: A Porsche 718 Cayman GT4 Refresh
CARZILLA JOURNAL · GYEON DETAILING NOTES
Almost ready to go.
A final rinse outside, red seats inside, and the small details that make the next drive feel better.
4-minute read · Porsche 718 Cayman GT4 · Photos by GYEON
The rear wing gets my attention first in this Porsche 718 Cayman GT4 photo set. There’s a neat row of GYEON bottles beneath it, plenty of dark trim, and then a completely different view when the door opens: red seat bolsters framing the darker centres. Those are the pictures I keep going back to.
For this story, I’m imagining the last stretch of a detail. The main wash is finished, the car is still wet, and there’s enough time left to make the cabin feel as cared for as the outside. I’d want to do a few useful jobs, put the bottles away and have the GT4 ready for its next outing.
One more step before the drying towel
The orange GYEON Q²M WetCoat bottle would be my choice at the final-rinse stage. It’s a spray-on, rinse-off sealant that adds water repellency to a clean exterior. I like the idea of fitting that protection into the wash while the hose is already in my hand.
With the panels cool and wet, out of direct sunlight, I’d use the small amount directed on the bottle and rinse each panel immediately with strong water pressure. Then move on to the next one. Keeping that rhythm matters: spray, rinse thoroughly, continue. There’s no waiting for it to dry and no hand-buffing step.

Once it was fully rinsed away, I’d dry the car with a clean microfibre towel and catch the little drips around the edges. That would be my cue to put the exterior tools aside, open the door and turn to the places I’d actually be sitting and touching.
The cabin’s smaller jobs
I’d start with a vacuum and a look around the trim. A light fingerprint here, a fresh mark there: those are the jobs for GYEON Q²M Interior Detailer. It’s a maintenance spray for suitable interior surfaces, with a natural matte appearance that makes sense to me in a cabin like this.
After testing a hidden spot, I’d spray a little onto a clean towel and gently wipe the compatible trim, turning to a fresh face as I went. Applying it to the towel gives me control around switches and seams. Any display or unusual surface would get its own manufacturer-approved care.
I’d want the cabin to feel clean when I opened the door and just as pleasant when I settled into the seat.
Giving the red leather its own attention
Those red bolsters would get a more focused clean with GYEON Q²M Leather Cleaner Natural. Its role is gentle removal of light dirt and oils from compatible leather, while keeping a natural matte look. I’d check the upholstery’s care requirements and test an inconspicuous area before starting.
With the seams already vacuumed, I’d work a small amount through a suitable soft pad or leather brush, one section at a time. A clean microfibre lifts the loosened dirt; a lightly damp second towel takes care of remaining suds, followed by a dry towel. The aim would be controlled moisture and a light touch around the stitching.


I’d keep the leather cleaner on the compatible leather areas and give the darker inserts the care their own material calls for. If a bolster showed wear or a stubborn stain after gentle cleaning, I’d stop and assess it rather than keep rubbing. Freshening the surface is a different job from repairing a worn finish.
I’d let the bolsters dry with the door open. From there you can see where the red leather meets the dark insert and check whether you’ve left any suds along that seam.
The product links in this story take you to the matching GYEON products at CARZILLA.
Photography supplied by GYEON. A detailing story inspired by the Porsche 718 Cayman GT4 photo series.