How Much GYEON ECO Wash Do I Add to a 10 L or 20 L Bucket?

For 10 L of water, add about 39 mL of GYEON Q²M ECO Wash at 1:256 or 67 mL at 1:150. For 20 L of water, use about 78 mL or 133 mL, respectively. If you fill a 20 L bucket halfway, use the 10 L dose. Use the litre mark the water actually reaches, even if there’s room for more.

GYEON ECO Wash rinseless dilution chart

Concentrate to add to measured water, rounded to the nearest millilitre
Water in bucket ECO Wash at 1:256 ECO Wash at 1:150
5 L 20 mL 33 mL
10 L 39 mL 67 mL
15 L 59 mL 100 mL
20 L 78 mL 133 mL

Read each column as a separate recipe. At 1:256, one part concentrate goes into 256 parts water. At 1:150, the same water takes more concentrate. Both are within GYEON’s published rinseless range for Q²M ECO Wash.

What if my bucket has a different fill line?

Concentrate in mL = litres of water × 1,000 ÷ dilution number. Say you leave room for a wash mitt and stop at the 12 L line. For a 1:256 mix, divide 12,000 by 256 and measure about 47 mL. For 1:150, measure 80 mL. Fill to the water line first, then measure the concentrate in a marked cup and stir it in.

Can I use the spray-bottle ratio in my wash bucket?

GYEON lists three applications on the same bottle. Use the rinseless range above for a bucket wash. The 1:15 to 1:10 directions are for waterless cleaning, and 1:20 is for use as a drying aid. If the lower doors have a visible layer of sand or mud, rinse off that grit before making contact with a mitt.

For the concentrate and bottle directions, see GYEON Q²M ECO Wash. For help choosing wash media and drying each panel, follow CARZILLA’s rinseless washing guide.

Photography by GYEON.