Room for Real Life: A BMW M3 Touring Wash with GYEON
CARZILLA JOURNAL · GYEON DETAILING NOTES
A little time for the long roof.
Wheel dust, wash water, and the pleasure of a clean wagon.
4-minute read · BMW M3 Touring · Photos by GYEON
I have a soft spot for a fast wagon. There’s something very appealing about a car with this much presence that still has room for the things a normal week throws at it. Looking through these BMW M3 Touring photos, I keep coming back to the silver bodywork, dark wheels and bright red calipers. Even standing still, there’s a lot to look at.
It also looks like exactly the sort of car I’d want to spend a quiet morning washing. A few well-chosen products, clean towels, and enough time to get around the whole thing properly. This is the GYEON wash I picture for it, starting with the details that sit closest to the road.
The wheels get the first turn
With those open spokes and red calipers, the wheels deserve a little patience. I’d let the wheels and brakes cool completely, find some shade, then rinse away loose dirt. Working through one wheel at a time keeps the job manageable and makes it easier to rinse each product before it dries.
GYEON Q²M Iron Wheel Cleaner REDEFINED would be my choice for the brake dust and road grime. I’d give it the time specified on its label, watching the conditions, then use a suitable soft brush where the spokes and recesses need help. Plenty of rinse water matters here. It’s easy to admire the wheel face and forget the little pockets around the bolts.
The rubber gets its own attention with GYEON Q²M Tire Cleaner. On a wet, cool sidewall, I’d work it with a dedicated tire brush to loosen grime and old dressing, keeping those stiffer bristles away from the wheel finish. Rinse, inspect, and repeat only if the rubber still needs it. I like this stage because it gives the tire a clean starting point before deciding on any dressing later.


Bathe+ and a bit of breathing room
After the wheels, I’d pre-wash and rinse the body to remove as much loose dirt as possible before touching the paint. The wheel tools would stay in their own bucket. A wagon gives you plenty of surface to work around, so there’s no prize for trying to wash the whole side in one go.
For this session, GYEON Q²M Bathe+ feels like a good fit. It combines washing with temporary SiO₂-based water repellency, which appeals to me for a regular maintenance day. I’d measure it using the directions on the Canadian bottle, since regional guidance can differ, and let clean wash media and light pressure do the work.

I’d start high and work down, cleaning the mitt frequently and leaving the dirtier lower sections until last. Around the rear hatch, I’d slow down again; all those edges give you another reason to pay attention. Bathe+ needs a thorough rinse before it dries, so the size of each section would follow the weather. If the panels were drying quickly, I’d make the sections smaller.
A good wash is one of the few jobs where slowing down can make the whole morning feel better.
The rinse is worth staying for
The rear-hatch photo is my favourite moment in the set: water in the air, light catching the droplets, and the BMW badge just visible through it all. It captures why I enjoy the idea of a proper wash day. There’s a clear point where the work starts giving the car back to you.


After a thorough final rinse, I’d dry gently with clean drying towels, keeping separate towels for the jambs and wheels. Water around mirrors, badges and the hatch would get a second look before packing up. Bathe+ can add helpful water repellency, but I’d still dry the car carefully instead of leaving the droplets to finish the job.
With the bottles packed away, I’d give the rear hatch one last look. On a wagon that earns its keep all week, that’s about the first place another fingerprint will turn up.
The product links in this story take you to the matching GYEON products at CARZILLA.
Photography supplied by GYEON. A detailing story inspired by the BMW M3 Touring photo series.