By using a thinner product on the pad, you’re both priming the pad before polishing and using a minuscule amount, instead of overusing product on your pads.
Users looking to fully perfect their paint are one step away from perfection with our polishing system, and Adam’s Polish makes any polishing task a breeze of ease.

Adam’s White Polish is formulated with the user in mind. This Diminishing Abrasive Technology (DAT) allows users to start with a small amount of product and continue to have a finer, more precise polishing experience with each rotation of the polisher. This product is recommended for maximum results with our Swirl Killer Polishing system and should be used with a White Foam Polishing Pad, or Red Foam Pad if working on a fragile clear coat with a darker color. Adam’s White Polish is designed to remove 2000-2500 grit sanding marks and must be applied after your vehicle is washed, decontaminated, and clayed for a hassle-free experience.

Please note: When polishing a surface, you are heating up the clear coat to remove the swirl mark away from your paint and perfect your finish. As you polish, the process with take a very minute amount of clear coat away ( 1/32nd of an index card) from your surface. Repeated use, or improper use, can lead to paint imperfections that will require professional assistance.

The water-based formulation features a Diminishing Abrasive Technology blend of aluminae oxides and polishing agents to cut swirls fast and effectively, while leaving a brilliant finish behind. When using a conventional compound or polish, you’re applying 4 pea-sized drops to the pad surface then spraying Detail Spray onto the surface to both wet the pad and allow the product to travel out to the outer edge of the pad to completely cover the surface. With Adam’s White Polish, you’re removing the worry of caking up your pads, clogging up fibers of your foam polishing pads, and keeping your polish working more effectively for longer!