Description
GYEON Q² Trim EVO 30 ml – Ceramic Trim Restorer and Protectant
GYEON Q² Trim EVO is a ceramic trim coating that deepens the appearance of compatible faded plastics and protects newer trim from everyday exposure. It leaves a water-repellent layer that supports easier cleaning while maintaining a natural matte or satin character.
Use it when you want longer-lasting trim care than a routine dressing provides. Correct cleaning matters: old dressings, trapped dirt and moisture can prevent an even result. The degree of restoration depends on the material and its condition, so a test area is especially useful on weathered or unevenly faded trim.
Key Benefits
- Colour enrichment: Helps restore a deeper appearance to suitable faded plastic trim.
- Longer-lasting protection: A ceramic treatment designed for extended service with proper preparation.
- Water repellency: Supports easier cleaning of exposed trim areas.
- Natural appearance: Intended to retain a matte or satin finish rather than an oily shine.
- New-trim preservation: Can protect compatible trim before visible fading develops.
Product Details
| Bottle size | 30 ml |
|---|---|
| Manufacturer-rated durability | Up to 36 months / 50,000 km |
| Typical consumption | Approximately 10 ml per car |
| Coating pH tolerance | 2–11 |
| Included | Coating, applicator set and manual |
How to Use
- Identify the material and test a hidden area for colour and finish changes.
- Clean thoroughly, removing old dressings and contamination. Allow textured surfaces and crevices to dry fully.
- Use a compatible preparation step such as Q²M Prep where directed, then observe the coating’s waiting period.
- Apply evenly with a suitable applicator, working on one small trim section at a time.
- Level the product to a uniform finish. Follow the supplied manual’s surface-specific wipe-off instructions; smooth and absorbent textured materials can behave differently.
- Inspect adjacent paint for accidental transfer and keep the coating dry for at least the first 12 hours. Follow the supplied manual for full aftercare.
Application Tips and Things to Watch For
Do not promise the same restoration on every faded plastic. Severe oxidation, staining and physical damage may remain visible after coating. Applying more product is not a repair for a degraded surface.
The product is sometimes described as a permanent trim restorer, but its stated service life is finite and depends on exposure and maintenance. For renovated lights, use only on an appropriate, clear-coated surface according to the instructions; the coating does not replace the entire headlight-restoration process.
Frequently Asked Questions
Can Trim EVO be used on new trim?
Yes. It can protect compatible new plastics as well as enhance suitable faded trim. Starting with a clean, residue-free surface remains essential.
Will it make the trim glossy?
The intended result is matte or satin, with increased colour depth. Material porosity and the original finish influence the appearance, so test before treating a highly visible area.
Can it repair white stains or deeply damaged plastic?
It may improve colour saturation, but it cannot reverse every chemical stain, crack or structural change. Assess a test section once it has settled before committing to the whole part.
How is it different from Preserve?
Preserve is a simpler trim dressing and maintenance protectant. Trim EVO is a ceramic treatment with more demanding preparation and a longer stated service life.
How should I maintain it?
Wash with a suitable maintenance shampoo and avoid unnecessary harsh cleaning. Additional dressings are not required to maintain the intended coated finish.
- choosing a selection results in a full page refresh