Description
GYEON Q² Pure EVO Lightbox – High-Gloss Ceramic Paint Coating
GYEON Q² Pure EVO Lightbox is a SiO₂ ceramic paint coating for a deep, glossy finish and durable water-repellent protection. Its character is especially appealing when you want the rich, reflective appearance associated with a freshly detailed car, combined with a dedicated coating’s maintenance benefits.
Pure EVO is designed to deliver its intended performance in one layer. The formula offers a generous wipe-off window in suitable conditions, but the correct timing still depends on temperature, humidity and the way it behaves on the panel. Careful preparation and inspection are the foundation of a clear, even finish.
Key Benefits
- Deep gloss: Enhances colour depth and the visual clarity of prepared paint.
- Single-layer installation: One properly applied layer provides the intended coating performance.
- Hydrophobic protection: Encourages water release and easier routine washing.
- Chemical resistance: Provides a protective layer suited to normal exterior exposure and maintenance.
- Outdoor application option: Can be installed in stable, shaded conditions with protection during initial curing.
Product Details
| Product type | SiO₂ ceramic paint coating |
|---|---|
| Manufacturer-rated durability | Up to 36 months / 40,000 km |
| Typical consumption | Approximately 25–30 ml per car |
| Coating pH tolerance | 2–11 |
| Available sizes | 30 ml, 50 ml and 100 ml |
| Lightbox essentials | Coating, applicator and manual; Cure is not included in the Lightbox configuration |
How to Use
- Wash, decontaminate and inspect the paint. Polish if you want to improve swirls or other correctable defects before protection.
- Ensure the surface is cool, dry and oil-free. Use Q²M Prep and wait 15 minutes in line with current GYEON guidance.
- Apply an even layer with the supplied applicator over a manageable area.
- Level and wipe according to conditions. GYEON allows up to 10 minutes in mild, cool conditions, but calls for immediate wipe-off in hot or humid conditions.
- Inspect from several angles with clean finishing towels, removing any remaining streaks or excess.
- Keep the coating dry for at least the first 12 hours and follow the supplied manual for full curing and the first wash.
Application Tips and Things to Watch For
The maximum wipe-off window is not a fixed waiting time. Start with a small section to judge the coating’s behaviour. Good lighting and fresh towels make it easier to catch high spots before they harden.
Pure EVO enhances the surface you prepare; it does not remove scratches or make paint scratch-proof. Avoid claiming guaranteed water-spot prevention. Continue removing contamination promptly and using careful wash and drying techniques.
Frequently Asked Questions
How does Pure EVO differ from Mohs EVO?
Pure EVO emphasises a rich, high-gloss SiO₂ finish with one-layer application. Mohs EVO uses modified polysilazane chemistry and is known for slickness and the option of a second layer. Both require thorough preparation and correct aftercare.
Do I need to apply several layers?
No. GYEON specifies Pure EVO as a one-layer coating. Focus on complete, even coverage rather than adding layers without a product-specific reason.
Which bottle size should I choose?
Use the stated 25–30 ml per car as a starting point. A 30 ml bottle leaves less margin for a large vehicle or application losses; larger sizes provide more flexibility. Coverage depends on size and technique.
Does the Lightbox include Cure?
The Lightbox configuration includes the coating, applicator and instructions, without the separate Cure maintenance bottle found in some full kits. Check the selected listing configuration when comparing kits.
How should I maintain it?
After curing, use a suitable maintenance shampoo and clean wash tools. Read CARZILLA’s GYEON coating maintenance guide for a practical aftercare routine.
- choosing a selection results in a full page refresh