Description
BigBoi WashrPRO V2.0, Mark2
We at bigboi understand that there is a perfect combination to deliver the perfect wash, so we have done all the hard work by fine tuning and delivering you the desired PSI and water flow rate to suit the fussiest professional detailer. From the pump head to motor, combined with the hose kit, right down to the nozzle orifice, we have created the one stop professional washer kit!!
The bigboi WASHR PRO is fitted with a Total Stop System (TSS) and will sense water flow in the pump, automatically turning off when the trigger is released, reducing the noise and motor wear.
The bigboi WASHR PRO comes with Brushless Induction Technology, giving it 4 times the life span of your conventional washer. Combined with the commercial duty Italian designed Triplex forged brass pump head the WASHR PRO 4 Pole set up delivers low 1450RPM with high torque. This allows the WASHR PRO to be one of the quietest units with a BD reading of under 80DB.
With the commercial grade offering, bigboi offers a standard manufacturing 2-year warranty on the WASHR PRO and a crazy 10-year warranty limited on the pump head. The WASHR PRO also contains ¼ inch quick connect attachments all round and is designed with the iconic bigboi colour palette.
Having a MAX rating of 1850PSI (130BAR) and a flow rate of 9.5LPM (2.5GPM), the bigboi WASHR PRO will output at the nozzle a tuned rate of 1200PSI with a water flow rate of 7.3LPM / 1.92GPM.
INCLUDED:
- 1 x bigboi pressure WASHR PRO
- 1 x Professional series large clear mouth foam cannon (Orifice size 1.15)
- 4 x quick release varying degree nozzles (Orifice size 3.5mm)
- 1 x Brass Water inlet connection
- 1 x Brass 3/8 quick release Hose connector M22/14MM
- User Manual
SPECIFICATION:
- Voltage: 120V/60HZ 15AMP (A dedicated circuit is required from this unit)
- Motor: 1800W (Peak) Induction
- Maximum Pressure: True 1850PSI (1200PSI) at the Nozzle.
- Max Flow Rate: 9.5LPM max ( 7.5LPM / 1.95GPM) at the nozzle.
- Max Water Temp: Can accept up to 60 C
- Power Cable Length: 11m / 36 Foot
- Power Plug: Certified Standard for your region
- Carton Dimension (L x W x H): 53x 28x 33cm
- Carton Weight: 28kg/ 61 pounds
IMPORTANT NOTE:
The WASR PRO is a commercial unit which requires a dedicated circuit with a stable volt delivery of over 102V.
Behaviour like the unit Humming or amp spiking would be a result of low volts being delivered to the unit. Please confirm socket wiring or try a different socket closer to the main power box to resolve the starting issue.
If you are connecting the unit to an extension cord, it is a requirement to use the below cord options:
Gauge 12AWG，the max length 100 foot/30m
Gauge 13AWG，the max length 82 foot/25m
Gauge 14AWG，the max length 65 foot/20m
**Coiled electrical extension leads are not recommended to be used with this unit**
WARNING: Failing to use the correct extension cord may damage the electronics of the unit and void your warranty, same applies to generator users.