Description
Adam’s Rinse Aid is a versatile, concentrated solution to quickly and effectively seal and protect all automotive exterior surfaces in a minimal amount of time and is sure to become a staple in your washing process. Simply utilize Adam’s Rinse Aid in a standard foam cannon/gun reservoir and hose onto all exterior surfaces of the vehicle to instantly install durable, silica-based, polymeric protectants – amplifying slickness, gloss and hydrophobic behavior of the surface. Adam’s Rinse Aid can be used on a vehicle as stand-alone protection or over the top of your favorite wax, sealant or coating. Adam’s Rinse Aid can also be diluted to make a quick detailer and drying aid solution to be misted onto the vehicle and pressure rinsed off as an alternative, more traditional method, if desired.
- Spray On / Rinse Off Complete Vehicle Protectant
- Quickly & Easily Coat All Exterior Surfaces
- Amplifies Slickness, Gloss, Color and Hydrophobic Behavior
- Use with Foam Cannon & Pressure Washer or with Foam Gun & Hose
- No Dye & Watermelon Sugar Scented
Instructions for General Use:
- Following washing the vehicle and while it is still wet, add 2-3 fl oz of Adam’s Rinse Aid to Foam Cannon/Gun Reservoir and dilute to volume with fresh water.
- Spray or hose Adam’s Rinse Aid solution over entire vehicle including paint, glass, wheels and plastics – this solution can be applied to all exterior surfaces safely and effectively. However, do not let the solution dry on the surface or residues could manifest.
- Once all surfaces are sufficiently coated, disconnect Foam Cannon/Gun and switch to fresh water and rinse all excess material off the surface thoroughly or proceed immediately into drying.
- Either towel dry or use forced air to finish drying the vehicle completely.
Quick Detailer / Drying Aid:
- Adam’s Rinse Aid can also be diluted to make an effective quick detailer and/or drying aid solution by diluting the concentrate with fresh water at 1:9 (1 part concentrate with 9 parts water for a total of 10 parts).
- Following washing the vehicle and while it is still wet, mist the Quick Detailer solution onto all exterior surfaces working a few panels at a time.
- Using pressurized water, spray off the excess solution thoroughly and note the instantaneous hydrophobic behavior on the surface.
- Either towel dry or use forced air to finish drying the vehicle completely.