Description
RENOVA is the first Traffic Film Remover Shampoo with an acidic pH on the market: a revolutionary product that opens a new segment, just as its predecessor PURIFICA did in its time.
It combines the cleaning effectiveness of a TFR pre-wash with the safety of a highly lubricated shampoo, offering an effect similar to LIMPIA but with an extra edge: the combined action of acid, which allows it to effectively remove traffic film and contaminants embedded in the film structure in a single step.
RENOVA is truly a 2-in-1: when used at dilutions between 1:5 and 1:50, it does not require an alkaline cleaner in the preliminary phase, making it ideal for washing and maintaining protected surfaces like PPF and wraps, even under the most critical conditions.
RENOVA was born from a real need, emerging from years of direct feedback from detailers, installers, and car care professionals: the difficulty of thoroughly cleaning PPF protective films, even when washed carefully with quality products.
The observations were always the same:
“PPF turns yellow.”
“It’s like the dirt is inside.”
“Even after washing, the surface stays dull.”
These insights highlighted a structural problem: PPF is a thermo-sensitive, elastic, and porous material that behaves completely differently from paint. It doesn’t hold dirt on the surface — it absorbs and traps it in micro-pores, where traditional cleaners can’t reach.
RENOVA is the technical, concrete answer to this problem.
It’s not just a line extension, but a product developed from scratch with a clear goal: to restore the original appearance of PPF by working from within, effectively removing the traffic film trapped in the film structure, without damaging the surface or compromising protection.
Its controlled acidic pH formula combines targeted cleaning power with maximum gentleness, using ethoxylated surfactants capable of penetrating deep into the microfissures of the material.
Unlike alkaline products or simple descalers, RENOVA does not act aggressively but with chemical intelligence, selectively breaking down the most stubborn contaminants: oxidations, mineral residues, carbon compounds.
Thanks to its high lubrication, rich protective foam, and maximum compatibility with thermo-sensitive surfaces, RENOVA is now an essential tool for every professional working on PPF, wraps, and delicate coatings.
It can also be used on sensitive paints and contaminated wheels, where it demonstrates excellent degreasing effectiveness.
Directions:
Manual wash (dilution 1:50)
- Dilute 20 ml of product in 10 liters of water.
- Apply with a high-lubrication microfiber mitt.
- Work the surface in sections, proceeding from top to bottom.
- Rinse thoroughly.
- Dry with a clean, dry microfiber cloth.
Intensive localized treatment (dilution 1:10)
- Dilute 100 ml of product in 1 liter of water.
- Apply to areas contaminated with mineral residues or limescale.
- Let sit for a maximum of 60 seconds.
- Rinse immediately.
Maintenance shampoo for PPF (dilution 1:200)
- Dilute 5 ml of product in 1 liter of water (50 ml in 10 liters).
- Apply with a mitt or sponge on an already wet surface.
- Work evenly and rinse thoroughly.
Booster on microfiber mitt (dilution 1:5)
- Dilute 200 ml of product in 1 liter of water.
- Pour the solution directly onto the microfiber mitt.
- Wipe the mitt over the surface, section by section, to restore hydrophobicity and gloss.
- Do not let it dry, rinse immediately after application.
Degreasing spray for wheels or critical areas (dilution 1:5)
- Dilute 200 ml of product in 1 liter of water.
- Apply with a sprayer directly onto wheels or contaminated areas.
- Work with a soft-bristle brush.
- Rinse thoroughly.
- Check compatibility beforehand on delicate surfaces.