TURTLE WAX HYBRID SOLUTIONS CERAMIC ACRYLIC BLACK POLISH IS AN ALL-IN-ONE FORMULA THAT CORRECTS, ENHANCES AND ADDS PROTECTION TO BLACK PAINT FINISHES.

• Precision Polishing Platelets remove scratches, swirls and other paint imperfections
• Black Pigmented Polish and Carnauba wax fills light imperfections and leaves a deep, rich black shine
• Ceramic SiO2 & Acrylic polymers delivers months of incredible water beading, protection against harsh contaminants and helps to prevent permanent water stains
• Formula can be applied by hand or by machine
• Use Hybrid Solutions Ceramic Acrylic Black Wax as a topper to maintain even better shine & protection

STEP 1
Wash and dry car Shake bottle well For best results, do not over-apply highly concentrated formula

STEP 2 - HAND APPLICATION
Apply 3 dime-sized drops to a foam applicator pad and spread product evenly with light to moderate pressure in an overlapping circular motion. Remove excess with a microfiber cloth, turning to a clean side for the final wipe. Use a damp microfiber cloth to remove high spots and activate shine polymers. Re-wipe with a dry microfiber cloth if necessary.

STEP 1

Wash and dry car Shake bottle well For best results, do not over-apply highly concentrated formula

STEP 2 - HAND APPLICATION

Apply 3 dime-sized drops to a foam applicator pad and spread product evenly with light to moderate pressure in an overlapping circular motion. Remove excess with a microfiber cloth, turning to a clean side for the final wipe. Use a damp microfiber cloth to remove high spots and activate shine polymers. Re-wipe with a dry microfiber cloth if necessary.

STEP 2 - MACHINE APPLICATION

Apply 4 dime-sized drops evenly spaced onto a medium foam buffing pad.  Apply to a 2ft x 2ft section. Use a D/A machine at a low speed to spread the product out and then turn to a higher speed using light to moderate pressure in a cross-hatch pattern. Remove excess with a microfiber cloth. Use a damp microfiber cloth to remove high spots and activate shine polymers. Re-Wipe with a dry microfiber cloth if necessary.

STEP 3

Allow paint to cure for 24 hours before washing or applying an additional wax/coating Use with other Hybrid Solutions Wash, Wax, Detailer & Coating products

Apply 4 dime-sized drops evenly spaced onto a medium foam buffing pad.  Apply to a 2ft x 2ft section. Use a D/A machine at a low speed to spread the product out and then turn to a higher speed using light to moderate pressure in a cross-hatch pattern. Remove excess with a microfiber cloth. Use a damp microfiber cloth to remove high spots and activate shine polymers. Re-Wipe with a dry microfiber cloth if necessary.