3D Pink Car Soap 128oz

(21)
Regular price
$26.78
Sale price
$26.78
Regular price
$0
Sold out
Unit price
Quantity must be 1 or more

Description

3D Pink Car Soap 128oz

3D Pink Car Soap 128oz is a pH-balanced car shampoo for regular hand washing. It combines rich suds, lubrication and easy rinsing to help lift dirt and road film while supporting a careful maintenance wash on compatible automotive finishes.

Key benefits

  • pH-balanced shampoo for routine washing.
  • Rich lather and lubricated mitt movement.
  • Clean-rinsing wash without a wax-protection step.

Choosing and using this product

Pink Car Soap is useful when you want a straightforward wash before drying, detailing or further preparation. It does not replace decontamination, polishing or a coating-specific panel-preparation process. Use separate wheel and body tools and keep the mitt free of trapped dirt.

The formula is concentrated, so measuring the solution is more predictable than adding product by eye. Foam quantity alone does not establish cleaning safety; pre-rinsing, light pressure, clean media and prompt rinsing remain important. The gallon container is practical for repeated washes and refilling a clean measuring bottle.

Application details

For hand washing, mix 1 US fluid ounce of shampoo per 1 US gallon of water. Add water to create suds, wash from top to bottom and rinse before drying. Metered commercial systems require their own calibrated setup; follow the equipment and product guidance rather than copying a bucket ratio.

How to use

  1. Park in shade and let the bodywork cool. Rinse loose grit from the vehicle before making contact, paying attention to lower panels where road dirt collects.
  2. Measure the shampoo using the product-specific dilution guidance below or the bottle label. Mix with clean water. If using a foam gun or cannon, follow its setup instructions rather than assuming its reservoir ratio equals the final dilution on the paint.
  3. Wash from the upper panels down with a clean microfiber mitt. Keep a separate rinse bucket or another effective method of removing trapped dirt from the mitt. Use separate tools for wheels and heavily soiled lower areas.
  4. Work in sections and keep the surface wet. Rinse the mitt frequently and replenish the wash solution when it becomes dirty. Lubrication helps the wash process, but it cannot make dirty tools safe for delicate paint.
  5. Rinse thoroughly before the shampoo dries. Check around mirrors, badges, trim joints and door handles for trapped suds, then rinse those areas again as needed.
  6. Dry with a clean, absorbent microfiber towel or suitable filtered blower. Gently remove remaining droplets from crevices so they do not run back over freshly dried panels.

Aftercare and maintenance

Keep up regular washes suited to the vehicle’s use and weather exposure. Remove bird droppings, bug residue and road salt promptly with appropriate products. Wash and dry mitts and towels after use, and store them away from grit. Inspect the clean paint before adding a maintenance spray or renewing protection; a wash cannot repair scratches or remove every type of bonded contamination.

Frequently asked questions

Is more shampoo always better?

No. Accurate dilution gives a more predictable wash and rinse. Excess concentrate can leave more residue and does not replace pre-rinsing or cleaning the wash mitt.

Should I let the car air-dry?

Drying with a clean towel or blower helps limit mineral spotting. Water quality, panel temperature and evaporation all affect the finish, even when the shampoo itself rinses cleanly.

Practical detailing tips

For a maintenance wash, the aim is to lift and remove loose contamination with as little unnecessary contact as possible. Pre-rinsing removes larger particles, the shampoo lubricates the contact stage, and a thorough final rinse carries away the loosened soil. Work in smaller sections when the weather is warm or windy so the wash solution stays wet until you can rinse it.

If the paint still feels rough after washing, inspect for bonded contamination before reaching for a clay tool. Use a suitable chemical decontaminant or a lubricated clay process only where needed. Clay can mark delicate finishes, so reserve it for a planned detail rather than every wash. Before polishing or applying a coating, follow the correction or coating system’s full preparation procedure.

Related 3D products

Complete your detailing routine with 3D Bead It Up Hydrophobic Spray Sealant, 3D GLW Quick Detailer, 3D Nano Pail Super Soap 128oz.

Visit full site CARZILLA.CA