NANOSKIN AUTOSCRUB Handy Towel 7" x 7" General Grade

Works fast and achieves professional results with a new advanced rubber polymer technology which replaces the use of clay bars. It safely and easily removes paint over spray, water spots, fresh tree sap, rail dust and other bonded surface contaminants from the surface of automotive paint, glass, moldings and plastic. Unlike the clay bar, the AUTOSCRUB can be cleaned by simply rinsing off the accumulated contaminates with water. If you should drop the AUTOSCRUB on the ground; just rinse the rubber clean and you're ready to go again. Unlike clay bars the AUTOSCRUB glides easily for sturdy and controlled handling. Constantly reshaping of clay is a thing of the past!

TIPS:

*For surface prep = Use with NANOSKIN GLIDE Instant Spray Lubricant.

*For One-Step Clay, wax, and seal = Use with NANOSKIN NANO SHOCK Hydrophobic Spray Lubricant Sealant.

*For glass prep. and hydrophilic anti-static sealant = Use with RAIN PREP Glass

Cleaner/Activator. Then follow with RAIN Glass Sealant and microfiber towel.

DIRECTIONS:

Use ONLY on clean, cool paint out of direct sunlight. DO NOT work on the surface over 144°F. Test in an inconspicuous place for the first time in case of unexpected adverse effects on paint surface.

1. Thoroughly wash vehicle to free surface of dust, sand, and dirt.

2. Dilute GLIDE to desired strength (16 oz. makes 1 gallon RTU.) or NANO SHOCK

3. Mist sufficient GLIDE or NANO SHOCK onto the surface evenly.

4. Polish the surface with light pressure.

5. Wipe off residue and apply wax or glaze.