Description
Libera is an innovative professional concentrated pre-wash developed by Labocosmetica, identified as a powerful alkaline product that falls within the TFR (Traffic Film Remover) category.
It stands out for its ability to combine the effectiveness of a traditionally aggressive TFR with the safety of a high-end pre-wash, breaking the classic rules of detailing.
The Labocosmetica philosophy that led to the creation of LIBERA moves away from TFRs based solely on “free” alkalinity, focusing instead on a calibrated blend of specific T-7V surfactants within an environment with high penetration capacity at low alkalinity to ensure:
- extraordinary cleaning depth
- maximum safety on surfaces, even protected ones
- As powerful as an INDUSTRIAL TFR, yet as safe as a premium pre-wash
- Does not affect paints, waxes, sealants, ceramic coatings, wraps, or PPF
- Slow drying: maximizes dwell time without leaving streaks
- Versatile use: bodywork, wheels, wheel arches, door jambs, ENGINE BAY
- VDA certification: the first TFR with this German safety guarantee
Differences from the range products
| ProDuct | Type | Key points |
| LIBERA | Alkaline, advanced TFR | Deep cleaning, decalcification, and PPF preparation. Safe on ceramic coatings. |
| RENOVA | ACID TFR | Specific for PPF maintenance, removes light dirt without affecting delicate films. |
| PRÌMUS 2.0 | Alkaline | Safe pre-wash for all surfaces, including ceramic-protected ones. Good effectiveness on light or maintenance dirt. |
Directions:
Libera must be applied as a mist and not delivered like a foaming pre-wash.
It should be used at the start, in place of the pre-wash phase, on a cool surface and in the shade.
For an even deeper clean, in case of heavily bonded road film and recommended before applying PPF, follow these steps:
Second pre-wash with LIBERA using a mitt, diluted at 1:20
OR
Second acidic pre-wash with Renova (2pH+ wash cycle)
Drying and inspection in preparation for PPF application
Tips: on complex areas (wheels, badges), use a soft-bristle brush.
Step 1: Preparation: vehicle in the shade, bodywork cool
Step 2: Dilute in a pump sprayer or pray bottle.
Step 3: Application: spray on dry bodywork, from bottom to top
Step 4: Dwell time:
General: 3–6 minutes
Do not let the product dry
Rinsing: with high-pressure water, from bottom to top