Description
Innovacar's SC0 Hydro Sealant is a water-based nanotechnology car spray sealant suitable for body and paintwork. Due to its unique and innovative formulation, it is able to create a chemical and molecular barrier coating. With nanotechnology, it will be possible to protect the car body for several months.
- Protective chemical barrier: through the siloxanes and fluoropolymers in the water-based formula, a nanotechnological chemical and molecular barrier is created, which protects and envelops the car bodywork, making it highly resistant.
- Mirror effect and colour depth: its unique formula creates a mirror effect and gives depth of colour.
- Greater water repellent effect: has an incredible water repellent and rainproof effect. It protects against limescale during the curing time, which is when the coatings harden.
- Silk effect: thanks to the protective barrier, the surface of the bodywork will be smooth to the touch.
- Suitable for all surfaces: thanks to the absence of petroleum distillates, it is suitable to withstand high temperatures and can be used directly on painted surfaces.
- Long lasting: the protective effect lasts up to 5 months if applied alone on the car after being cleaned properly with SP1 Prewash and S2 Foamy. The protection can last up to 9 months, if combined with W1 Quick Detailer used 20 minutes after the first application of SC0 Hydro Sealant and maintained over time with H20 Coat, every 3 washes.
- Suitable for cars with and withing coating: it is a product that can be used both on cars that have benefitted from a coating and/or polishing process, and on cars that have not been treated. This also makes it perfect for classic cars, the original paint condition of which must be preserved as much as possible.
How to protect the car bodywork and apply the SC0 Hydro Sealant spray:
- Clean the car in prewash with SP1 Prewash, in the wash step with S2 Foamy and use the specific Innovacar products as support for the various contaminations.
- Make sure the car surface is dry.
- Apply 2-3 sprays of SC0 Hydro Sealant on the low pile microfibre cloth.
- Apply panel by panel in a crisscross manner: then proceed by applying the product horizontally from right to left all over the area and then start again vertically, from top to bottom, along the same area
- Go over the surface again with a medium/long fibred microfibre cloth with circular movements, turning it over often to remove any excess.
- Wait up to 7 hours after the application for complete activation. The effect lasts up to 5 months.
- 20 minutes after application you can use W1 Quick Detailer to finish the surface. Maintain it over time with H20 Coat every 3 washes to enhance the protective effect up to 9 months.