Description
GYEON Q²M Bathe – pH-Neutral Car Shampoo
GYEON Q²M Bathe is a concentrated car shampoo for regular hand washing of coated and uncoated vehicles. Its slick formula helps a suitable wash mitt glide across the paint while lifting everyday dirt, making it a useful foundation for a careful maintenance routine.
Bathe focuses on cleaning while respecting existing protection. It is a good choice when you want to wash a ceramic-coated car without making a protection-adding shampoo part of every wash. Use it after pre-washing and rinsing away loose contamination, then finish with a thorough rinse and gentle drying.
Key Benefits
- Lubricated contact wash: Helps reduce friction between the wash tool and the surface.
- Protection-friendly cleaning: Suitable for ceramic coatings and sealants when correctly diluted.
- Concentrated formula: A small measured quantity prepares a full wash bucket.
- Regular maintenance: Designed for the recurring task of removing everyday road dirt.
- Versatile exterior washing: Suitable for compatible paint, trim and delicate exterior finishes.
Product Details
| Product type | Concentrated maintenance car shampoo |
|---|---|
| Recommended dilution | 1 part product to 500 parts water |
| Mixing example | 20 ml in 10 L of water |
| Manufacturer-listed pH | 6; marketed as pH-neutral maintenance shampoo |
| Available sizes | 500 ml, 1 L and 4 L |
How to Use
- Work on a cool vehicle in the shade. Pre-wash and rinse to remove as much loose dirt as practical.
- Measure Bathe into your wash water at the recommended ratio. For 10 L of water, use approximately 20 ml.
- Soak a clean wash mitt or pad in the solution. Wash one section at a time with light, straight passes.
- Clean the wash tool frequently in a separate rinse bucket or use fresh wash media. Leave the dirtiest lower areas until last.
- Rinse thoroughly before the shampoo dries, then dry with a clean microfibre drying towel or suitable blower.
Application Tips and Things to Watch For
Do not rely on shampoo lubrication to make trapped grit harmless. Clean wash tools, adequate pre-rinsing and light pressure are all important. Keep wheel and tire tools separate from paint-washing media.
Avoid direct sunlight and hot panels. If conditions are drying the solution quickly, reduce your working area and rinse sooner. Adding excessive shampoo is not a substitute for a more thorough pre-wash or a dedicated contamination remover.
Frequently Asked Questions
Is Bathe suitable for ceramic-coated cars?
Yes. It is a maintenance shampoo designed to clean while respecting the protective layer. For ongoing care, combine it with clean wash tools and prompt removal of contaminants such as bird droppings.
What is the difference between Bathe and Bathe+?
Bathe is focused on regular washing. Bathe+ adds SiO₂-based hydrophobic protection during the wash. Choose Bathe when you want a straightforward cleaning step and prefer to manage protection separately.
Will it remove tar or iron fallout?
Those contaminants often require dedicated chemical treatment. Bathe handles the main wash; tar removal and iron decontamination are separate steps used when inspection shows they are needed.
Does more foam mean a safer wash?
Foam can help you see coverage, but lubrication, clean wash media and correct technique matter more during contact washing. Follow the dilution guidance rather than adding extra product solely to produce more bubbles.
- choosing a selection results in a full page refresh