3D GLW Series Carpet & Upholstery Wash 16oz

(1)
Regular price
$17.95
Sale price
$17.95
Regular price
$0
Sold out
Unit price
Quantity must be 1 or more

Description

3D GLW Carpet & Upholstery Wash 16oz

3D GLW Series Carpet & Upholstery Wash is a fabric cleaner for lifting dirt and stains from automotive carpet, cloth seats and floor mats. It combines cleaning with odour control to refresh frequently used interior areas after spills, muddy footwear or everyday use.

Key benefits

  • Targets embedded soil and common fabric stains.
  • Helps refresh the appearance of compatible upholstery.
  • Includes odour-removal properties for a cleaner-smelling cabin.

Choosing and using this product

Work on a small section first and choose an application method suited to the fabric. The goal is to loosen soil and remove it, not drive extra liquid into the seat foam. This product should not automatically be substituted for a low-foam extractor-tank shampoo; use the label’s directions and the machine’s approved cleaning solution requirements.

Application details

Follow the supplied bottle for application strength and removal method. Do not infer a dilution from a different GLW cleaner or use a generic ratio across the range.

How to use

  1. Vacuum the surface thoroughly and remove loose dirt from seams, footwells and mat edges. Identify the fabric and follow its care guidance; test colourfastness in a hidden area first.
  2. Prepare the cleaner using its specific directions below. Use suitable brushes, clean towels and equipment approved for the type of cleaning being performed.
  3. Apply a controlled amount to a small area. Avoid soaking the backing, seat foam or electrical components. Work evenly across the affected section instead of saturating a single spot.
  4. Agitate gently with a fabric-appropriate brush and remove the released soil using the method specified for this product. Use a wet-capable extractor or vacuum where liquid removal is required; do not collect liquid with a dry-only vacuum.
  5. Remove remaining cleaner as directed and make additional recovery passes when using an extractor. Check the fabric and seams for retained moisture, then allow the surface to dry with good ventilation.
  6. Inspect once fully dry before deciding whether to repeat treatment. Reinstall removable mats only after both the mat and carpet beneath are dry.

Aftercare and maintenance

Vacuum regularly to remove abrasive grit before it settles into the fibres. Blot fresh spills with a clean towel rather than rubbing them deeper into the fabric. Dry the cabin thoroughly after wet cleaning and investigate persistent dampness instead of covering it with fragrance. Keep fabric-cleaning brushes separate from exterior tools and clean the equipment’s recovery tank after use.

Frequently asked questions

Why can a stain return as the area dries?

Soil or cleaning solution remaining deeper in the material can move back toward the surface during drying. Controlled application, thorough recovery and complete drying help reduce this problem.

Can I soak a headliner or seat?

Avoid saturation. Adhesive-backed fabrics, headliners, perforated areas and seats with electronics need careful material-specific treatment. Use the vehicle’s care guidance before applying a wet process.

Related 3D products

Complete your detailing routine with 3D Extractor Shampoo 128oz, 3D Fur Kleen Pet Hair Remover 128oz, 3D SSX Salt Stain Remover 128oz.

Visit full site CARZILLA.CA